How to Read the Lippert Components Axle Description Measurements
Question:
Lippert components axlenv 121067 lc152-s8-86.5-68.5. Is 86.5 the outer measurment, and 68.5 the bracket?
asked by: James C
Expert Reply:
For the LCI52-SB-86.5-68.5, the two ending measurements are:
1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches.
2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches apart.
It looks like this is a 5200-lb capacity axle. So, you would need a hub like part # AKHD-655-6-K. I've linked to a list of those hubs for you. Once you've determined your wheel size and bolt pattern, it will help you determine which hub is the correct one.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Replacement Cover for etrailer and Ram Electric A-Frame Jacks - Black
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Shop: Trailer Wiring
- Shop: Base Plate for Tow Bar
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Search Results: bx1730
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Article: Double-Eye Trailer Suspension System Review
- Search Results: dexter equalizer
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: trailer suspension bushings
- Search Results: k71~384~00
- Search Results: t18a
- Q&A: Parts Needed to Flip Trailer Axles and Also Install Lift Kit
- Q&A: Replacement Axles for Dexter 2800 lb Round Tube Straight Trailer Axles on 5th Wheel Trailer
- Search Results: grease packer
- Search Results: grease
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: How to Determine Correct Torque Setting for New Disc Brake Setup on Boat Trailer
- Q&A: Replacement Wheel Stud for Lippert 3,500 lb Axle
- Q&A: Lug Nut Torque for a Trailer Wheel
- Q&A: Should a Trailer Brake Magnet Make Contact with a Drum Even With No Brakes Applied
- Shop: RV Exterior Lighting
- Shop: Brake Controller
on Trailer Hubs and Drums
