Titan Trailer Brakes T10HREKITBB Review Video

The DeeMaxx item #DE86VR won't because of the spacing on the mounting bracket but I have a caliper that will. To replace your Tie Down Engineering 46304 caliper you will need the Kodiak Disc Brake Caliper item #KDBC225DAC.

I believe you meant a TDE 46245, is that correct? If that's the case, you've got a 3500 lb axle which uses a 10 inch hub/rotor with a 5 on 4-1/2 wheel bolt pattern. You'll want to use the Kodiak #KHR10D hub/rotor as a…

I was able to confirm with my contact at Optronics that the mounting post on the #MCL95AB is stainless steel, but the mounting hardware is not.

Yes the kit you need is the part #T10HREKITBB that you referenced which you'd need two sets of since you have a tandem axle trailer. This does come with the correct bearings and seal too which would be all that you'd need.

The only way to turn a surge brake actuator "off" is to engage a lockout on the actuator. Some actuators have manual lockouts, others have electric lockouts, and some have no way to lock out the actuator. Typically, free-backing brakes are…

We do have the correct bearing kit for your TDE46246 hub, but do not carry TDE rotors. That said, the correct bearing kit is the following: - Hub Bearing Kit #BK2-100

Please refer to the linked FAQ article that concerns converting from drum to electric-over-hydraulic disc brakes. This explains all the components required. I have also attached a link that will take you directly to some examples of the disc brake…

Yes, you will have no problem using the Dexter DX7.5L A-60 7,500 lbs Brake Actuator item #DX56FR. The weight rating is for gross weight and tongue weight and the stronger actuator will work perfectly fine with your current disc breaks. Going up in…

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR is designed to mount on a 3" x 5" straight tongue. In order to make this work for your trailer, you would need to use a flexible brake line since the actuator and line will be…

If the solenoid is getting a full 12 volts and is grounding properly it should be shutting all the way. Since you said it is clicking that makes it sound like it's getting power. You could try improving the ground circuit but most likely…

It sounds like you have a Demco Actuator to me like #DM8104002. We also have one with a 4 inch drop #DM8104311. Both are Hydraulic Brake Actuators that are rated at 12,500lbs.,has a 2-5/16 inch ball, and bear the DA10 model number. I was able to look…

I believe you are asking if the hubs/bearings that come with Dexter Disc Brake Kit part #K71-633-2 will work on a Shorelandr or Lund trailer. Since I do not have the ability to cross list bearings by manufacturer. The best way to determine which…