Replacement Disc Brake Kit for Boat Trailer with UFP 2513 Brake Assemblies
Question:
Its time to replace the brakes on my 2004 boat trailer. It has 10inch disc brakes the caliper has UFP 2513 on it. What are my options for the complete set? It looks like I need 2 of Item # T10HREKITBB to get a complete assy with bearings, but Im no expert. Let me know my options. Thanks
asked by: Armistead S
0
Expert Reply:
Yes the kit you need is the part # T10HREKITBB that you referenced which you'd need two sets of since you have a tandem axle trailer. This does come with the correct bearings and seal too which would be all that you'd need.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Parts Needed to Convert Surge Drum Brakes to Electric Disc Brakes
- Shop: Replacement Caliper for Dexter 10" Brakes - Driver's Side
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Q&A: Correct Replacement for UFP A-60 or A-75 Brake Actuator
- Shop: Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Video: Titan Disc Brake Assembly Installation
- Video: Titan Trailer Brakes T10HREKITBB Review
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Search Results: ufp a 60 brake actuator
- Search Results: surge brake
- Search Results: surge brake actuator
- Search Results: surge brake master cylinder
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Q&A: Torque Spec to Use When Installing Mounting Bolts and Hardware # BRKH10A
- Video: Redline Brake Assembly Mounting Hardware Installation
- Search Results: trailer brake controller
- Search Results: trailer brakes
- Search Results: brake actuator
- Q&A: Bearing Buddy to Fit Titan Premier Disc Brake Kit # T2HRCM10DAC
- Q&A: Buddy Buddy Recommendation for Trailer Hub with Bearings L44649 and L68149
- Q&A: Replacement Hub and Rotor Assembly with 5 on 4-1/2 Bolt Pattern for 3,500 Pound Trailer Axle
- Q&A: Disc Brake Kit Recommendation for Boat Trailer With 3,500-lb Axles