Stromberg Carlson Trailer Jack LG-142178 Review Video

The Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs item #LG-142178 you were looking at is the correct replacement motor for the discontinued Atwood 75721. The Gearbox for Venture Electric 5th Wheel RV Landing Gear…

The 12-volt replacement motor for the Atwood 75722 motor is part #LG-142178. This motor is 12-volt and has a lift capacity of 5,500 lbs. The motor has an overall height of 8-1/2 inches.

Since you said your gearbox says Venture on it we have just what you need. Since the gears are stripped it would be the best solution to replace the gear box and the motor. Gear box #LG-179015 will fit Venture landing gear jacks and replacement motor…

EOH actuators do differ in their response time. From the moment you press the brake pedal the time needed for the pump in the EOH actuator to build hydraulic pressure and push that through your brake lines, through the T fittings, and to your disc…

For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front #TLC2225 and rear tie down #TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the…

It could be the motor but it could also be the screw/nut inside the jack leg that is causing the problem. Since you mentioned that it is hard to crank it manually I suspect that it is likely the screw and/or nut. On jacks that have an ACME screw the…

If the replacing the gear box didn't fix the problem, then as long as the internals of the legs themselves are still in good shape replacing the motor would be the next logical step. Before doing that, I'd use the crank to operate the landing…

For your 2010 Open Range 5th-Wheel Trailer, I recommend looking at the Stromberg Carlson Electric Landing Gear Set #LG-4. Each leg on this set is 33-1/2 inches tall and provides up to 19-7/8 inches of travel. It has a combined weight capacity of…

The most important metric for selecting new landing gear legs for a 5th wheel trailer is the overall length of the outer tube. The two most common measurements are 29-1/2" and 33-1/2". If you select the correct replacement based on the…

If there isn't a brand name printed on a tag somewhere on the actual landing gear it is not easy to determine because they all look and function the same way. The nice part about that is that if you need to replace parts or complete systems they…

I spoke with my contact at Lippert about your motor and gear box. They told me that if the motor on your landing gear is a 75721, and there is no replacement gear box available for that unit. The replacement motor kit that would work for the landing…

The first error code, SH, you are seeing on the Prodigy Brake Controller (instructions linked below) means the brake wire sees a short circuit during idle condition. The second code, OL, indicates an overload condition during operation. For the first…