SportRack Hitch Locks - Rack Specific Anti-Rattle Lock - SR0901 Review Video

The 24x60 inch Pro Series Cargo Carrier part #63153 that you referenced weighs 59 lbs. Check out the review video I attached for this carrier for you to check out as well.

The listed weight capacity of the Rola TX-104 4-bike rack, part #59401, is correct at 100 lbs for 4 bikes. The Yakima hanging hitch 4-bike racks do seem to run at a little higher weight capacity for 4 bikes at 120 lbs, and the Thule hanging hitch 4…

Once the rack is locked into the receiver, the end of the cable with the loop is passed around the shank of the rack near the receiver. Then the end of the cable with the locking tip is passed through the loop, and the cable is pulled snug. The…

It sounds like you have the Bell HitchBiker 450. Assuming you are correct and the previous bolt had a 1/2" - 13 thread pitch you can likely use the Anti-Rattle Hitch Lock #SR0901 as a replacement. However, I cannot confirm that this fits…

From my research the Bell Hitchbiker 450 is basically the Swagman Trailhead 4 Bike Rack for 1-1/4" and 2" Hitches - Tilting #S63380 with a couple custom features. For the hitch pin, I recommend using the Locking Anti-Rattle, Threaded Hitch…

The Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting #C18085 would be a great option for your 42 lb e-bike and your 2013 Toyota Prius as it's Class I hitch compatible like the hitch you have and also has enough…

The Curt #C11122 trailer hitch for your 2013 Chevy Camaro does not require you to buy the ball mount too if you are planning to just carry a bike rack. When carrying bikes with this hitch, you will need a stabilizer strap like part #18050 when…

i checked the specs for the hitch receivers that fit your 2020 Kia Soul. Each of them has a maximum tongue weight of 200 lbs. The Inno Tire Hold 1 Bike Platform Rack - 1-1/4" and 2" Hitches - Tilting, part #INH110, will fit your Class I…

One of the great things about the Curt platform bike rack part #C18085 is that it can easily attach to women's bikes like yours and not need an adapter bar. I attached a picture that shows this rack holding a cruiser style bike with a very low…

Good news, I went out and grabbed the Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers #SR0901 and one of the Curt Premium 4 Bike Racks part #C18064 that you also referenced to test the two and found that the hitch lock fits the…

We have a solution for your cargo carrier with a hollow shank but you would not be able to reuse the anti-rattle device of your bike rack. You would need a product like the part #63232.

The SportRack Hitch Lock, part #SR0901 is a manufacturer-specific item that will only work with certain SportRack bike racks. The Softride Anti-Rattle Device and Lock, part #SR25219 would be a better option, as long as the shank on your bike rack is…