Does Longview Tow Mirror part # LVT-3100C Fit 2016 Ram 1500 SLT

Question

Question:

Does your custom no tool slide on mirror fit the above?

asked by: George D

0

Expert Reply:

Yes, the Longview Tow Mirror part # LVT-3100C that you referenced does fit your 2016 Ram 1500. I attached an install video that shows the mirror set installed on a 2016 Ram 1500 just like yours for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I spoke with my contact at Longview and she said Custom Towing Mirror Set #LVT-3100C will fit the stock OEM side view mirrors on the 2014 Ram 1500 with the power folding feature. Your mirrors would be able to fold just fine with these installed.…

view full answer...

Answer 2

I called my contact at Longview and they told me that the Longview Custom Towing Mirrors, part #LVT-3100C, will fit the 2015 Ram 1500. I have attached a couple of photos of the style mirrors that the #LVT-3100C will fit. These mirrors will fit…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…

view full answer...

Answer 8

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 9

The L-brackets of the Reese weight distribution system #RE44FR need to install between 24.5 and 27.5 inches from the hitch ball center. I attached a picture that I took from the instructions that shows this. The range gives you a bit of flexibility…

view full answer...

Answer 10

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

view full answer...

Answer 11

Since your weight distribution hitch is working to keep your 2020 Ram 1500 level I recommend going for the lighter Blue #SSR-307-40 springs. These have the 1" spacer as well like the heavier Black #SSR-307-47 springs which you can take out or…

view full answer...

Answer 12

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

view full answer...

Does Longview Tow Mirror part # LVT-3100C Fit 2016 Ram 1500 SLT

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching