Where to Install the Mounting Brackets of the Curt TruTrack # C17499 Compared to the Hitch Ball

Question

Question:

how far back from the ball do you need to mount the clamp on brackets on the trailer frame

asked by: Jeffery B

0

Expert Reply:

I spoke with my contact at Curt who said that the ideal location for the brackets is 28" on your frame from the hitch ball for the Curt TruTrack # C17499. He did say that they designed this Weight Distribution (WD) system so that you have a little more freedom in where you mount the brackets due to propane tanks or other accessories so there is a little wiggle room in the exact location.

expert reply by: Jon G

0

Answer 1

When doing your math on trailer tongue weight (TW) you do NOT need to include the actual weight of your selected weight distribution hitch, such as Curt's TruTrack #C17499, because this weight is essentially suspended between the vehicle and…

view full answer...

Answer 2

You really would want to determine the loaded tongue weight first to pick out the best option but most likely the higher rated #C17501 with it's tongue weight range of 1,000 to 1,500 lbs would be best option. Typically trailer tongue weight is…

view full answer...

Answer 3

Weight distribution systems are classified by the range of tongue weights they can handle. The Curt TruTrack, part #C17500 is rated for tongue weights ranging from 800-1000 lbs. Trailer tongue weights are usually from 10-15 percent of the loaded…

view full answer...

Answer 4

The Curt TruTrack Weight Distribution System part #C17499 is what I recommend for a 2021 Jayco Jay Feather X23B. It has integrated sway control for stability, built-in zerk fittings for ease maintenance, and a simple no-drill design. It also comes…

view full answer...

Answer 5

To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind…

view full answer...

Answer 6

When the instruction manual for the Curt TruTrack Weight Distribution System part #C17499 states to set the bracket height closest to the spring bar position set with the jack earlier, they are referring to the when you raised the front of the…

view full answer...

Answer 7

Yes, a weight distribution system like the Curt TruTrack Weight Distribution System part #C17499 will add stress to both the trailer and vehicle frame. That said, this stress is not usually enough to cause damage. The only exceptions to this would be…

view full answer...

Answer 8

A trailer hitch like the etrailer #e98850 is a Class III hitch (hitches are given a class based on their weight capacity and receiver size) and will attach to the frame of your 2014 Toyota Tacoma, so it will provide a secure connection to your…

view full answer...

Answer 9

The bars with your current Husky weight distribution system are going to be too heavy duty for your new trailer. Unfortunately, we no longer carry this line from Husky and we will not have the lower rated bars. With that being said, we do have the…

view full answer...

Answer 10

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

view full answer...

Answer 11

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 12

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

view full answer...

Where to Install the Mounting Brackets of the Curt TruTrack # C17499 Compared to the Hitch Ball

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching