etrailer Trailer Suspension - Leaf Spring Suspension - 93003-3X Review Video

The inner bearings should be #LM48548 (1.375 inch inner diameter), outer bearing should be #L44649 (1.06 inch inner diameter) and the grease seal should be #58846. I would recommend you pull your bearings out to verify that but that SHOULD be what…

Your hubs are not directly compatible with any axle we currently carry. The 8-147 hubs are agricultural hubs and although very close to fitting will not work with the new axle spindles. My recommendation is to get your new axle with the kit that…

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

Thanks for the picture! The spring shouldn't hit the frame like yours does in the picture, so the correct solution would be to either add a longer front hanger or using a shorter spring. The correct replacement hanger will be dependent on the…

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

When welding a metal part to another piece of metal, it is always best to have as much metal touching between the two parts. With this in mind, the majority of customers will weld the top of the hanger to the frame of the trailer, leaving the side…

As they wear, leaf springs tend to flatten out. The first step is to get the correct length of the existing springs. In order to do that, you'll need to put the trailer up on jack stands and measure them (center eye to center of the slipper) with…

A bushing is not required for the c-hook end (sometimes called an open eye end) of a slipper spring like the 4-Leaf Slipper Spring w/ Open Eye End #e33SR. The closed eye of this spring does have a bushing included; I have added a link to a video…

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

The Slipper Spring #e33SR referenced in your question is indeed the closest option we have available for a slipper spring that matches the dimensions on your trailer. Slipper springs come in 1-3/4 inch, 2 inch, 2-1/2 inch, and 3 inch widths, so you…

I checked the specs for several model years of the EZ Loader trailer models like your TAL102B 20-23 5200 but no detail is provided for the leaf springs other than that they are rated for the trailer's 5200-lb axle. To know the actual length of…

We do have an upgraded equalizer for your Dexter Curved Equalizer item #K13-142-02. You will want the Equa-Flex Cushioned Equalizers item #LC314336. For upgraded shackles and wet bolts you will want the MORryde Suspension Upgrade Kit for Tandem Axle…