Review of Lippert Trailer Leaf Spring Suspension - Bronze Bushing - LC32SV Video

You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…

I do have a way to help you figure out what you need, but we unfortunately don't have a database with those exact parts so we will have to go the old fashioned way of taking some measurements. From what I could find I believe that you have tandem…

A 2-3/8 inch diameter Dexter axle is going to have a 3,500 lb capacity. Having the leaf springs over the axles (or vice versa) would not affect the weight capacity of the axle in any way either.

I have a replacement option for you, but the only slipper spring we offer that is 1-3/4" wide and is 26-1/4" long is the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long #e33SR. Since you mentioned that…

The 4-Leaf Slipper Spring #e33SR that you referenced actually comes included with the nylon bushing but if a replacement is needed then the 9/16 inch #TRBU11561 that you mentioned would be the correct size and will work perfectly. The correct bolt…

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

I believe you need the 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles #e33SR which measures 26-1/4" from the center of the spring eye to the end of spring.

The wet bolt and shackle kit part #LC52SV that you want to use with the Road Armor #LC696740 does not come with leaf spring bushings but we can help with that. I believe what you are looking for is bronze bushings like the part #K71-291-00 as brass…

To slightly lower your trailer that has had an "axle flip" kit installed you would want to use slightly shorter shackle straps, not longer ones. Shorter shackles will let the axle rest closer to the trailer frame, which lowers the trailer…

Good question, and what happens is that leaf springs elongate over time, and since you mentioned you got measurements of 25-1/2 inches from center eye to center eye and 26 inches under partial load, the best option for leaf springs really is the…

The etrailer Trailer Wheel Lock part #288-02020 will work on any wheel/tire with a width between 6-3/4" - 10-1/2". I don't have a list of every wheel/tire that the lock fits unfortunately but so long as yours is within this range…

The first thing I would check on your trailer is the capacity of the springs. You need to be sure the spring capacity is rated at 1/2 the axle capacity. That way 2 springs equal the capacity of the trailer axle for proper fit. Check the arch of the…