Pollak Wiring HM40978 Review Video

Hey Bill, the Curt 7-way part #C42JR does fit your 2017 Audi Q7. The Audi part number you referenced is a standard 7-way like what this part number was designed to replace.

The distance between the mounting holes on the Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket, #HM40975, measures 2 inches to 2-3/4 inches. I have attached a picture to illustrate these measurements. Two, 5/16 inch self tapping…

I think the part #STL68RB would be perfect for your flatbed truck (looks good by the way). The dimensions of the this oval light are 10 inches long and 3 inches tall. They do stop/turn/tail/reverse light functions as well so you would be totally set.…

Thanks for the picture! Yes, it will. The old factory connector on your 2005 GMC Yukon XL Denali will pop out once you disconnect the wiring harness and you'll be able to insert the Curt Replacement OEM USCAR Trailer Connector item #C42JR.

You will naturally be better off if your shop does NOT break off the factory weld nuts when removing the OEM hitch from the frame rails on your 2001 Excursion. Given the vehicle's age its quite likely that the bolts securing the OEM hitch will…

Sounds like your 2017 Audi Q7 has the round connector needed for installing a 7-way like the part #A10-7072VP that you referenced. All you'd need to do is plug this in and you'd be set. I attached a picture that shows the round connector your…

I looked at some pictures of the 7- and 4-Way connectors on the 2011 Ford F-150 and it appears that you can use bracket #HM40978 with little to no modification. I have included a link to a video featuring this bracket for you.

I went out to the warehouse and pulled Replacement Mounting Bracket #HM40978 to measure it. The mounting holes are spacing 2-3/8 inches apart on center. I have included a picture and video for this bracket for you as well.

A vehicle's towing capacity depends on the entire complement of factory equipment installed on it. The best place to confirm this is the owner's manual. I checked an online edition of the manual for the 2014 Jeep Grand Cherokee Limited with…

For your 2020 Jeep Grand Cherokee, I recommend using the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C62VR with the Universal Installation Kit for Trailer Brake Controller #ETBC7. The #C62VR will plug directly into…

The holes are pre-drilled in the Draw-Tite Max-Frame Trailer Hitch Receiver item #75699. What you are seeing is paint from the powder coating process that got left in there. It will come right out when you attach the screws. The Tekonsha T-One…

The part #HM40975 is designed to fit the round 7-way connector that is found on several vehicles. To install it would require your vehicle to have this round connector. (see picture) If instead you needed a way to hardwire in a 7-way to a vehicle you…