Optronics Trailer Plug Covers - 7 Blade Cover - ACP7B Review Video

The measurement I believe you're looking for on the BoatBuckle G2 ratchet straps, part #IMF08893, is about 4-1/2 inches. I've attached a picture that shows the dimension. If this isn't the correct measurement let me know.

The Powerbuilt Unijack #ALL620470 referenced in your question has a weight capacity of 4,000 pounds. This is likely enough for your 8,200 pound trailer, but I recommend going up a bit with the Unijack #ALL620471 that is rated for 6,000 pounds. This…

When the Powerbuilt Unijack #ALL620470 is in it's lowest position it's overall height is 8-5/8 inches. When fully extended the height is 18-3/8 inches.

I went out to the warehouse to measure BoatBuckle G2 Retractable, Ratcheting Transom Tie-Downs #IMF08893. The overall width at the widest point is 4-5/8 inches. The mounting hole is right in the center so from either edge to the center of the…

I spoke with the manufacturer of the SmartPlug RV and Marine Power Inlet and Connector #SM67FR and for your application they actually recommend using 6 AWG wire to properly supply your RV with power from the shore power pedestal.

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

The wires of the Phoenix Electric Trailer Jack #UF38-944040 are 10 gauge and 81 inches long.

The 90 degree portion of the EZ Coupler RV Sewer Hose Kit #D04-0115 is a separate piece but the part that fits in the dump station inlet is attached to it. I included a picture showing this close up.

The biggest difference between the two junction boxes that you referenced is the number of terminals. The #38656 has 7 and the #PK52248 has 10. For a 7-way I would recommend you go with the 7 pin box part #38656 since there would be no need for more…

Either one is fine to do. With the Fulton Hi-Mount Spare Tire Carrier part #FSTC1000301 you are not going to be adding a great deal of width to your trailer so the difference is minimum. Giving you my opinion since there is no rule I would Choose the…

Yes, we have exactly what you need. To convert the 4-way of your Jeep to a 7-way so that it will adapt to your trailer that has a 7-way you have two options. If your trailer doesn't have brakes all you would need is the #37185. This would simply…

Most versions of the 2013 Jeep Wrangler are rated to tow a maximum of 2,000 pounds. But there are a few models that have a 3,500 pound towing capacity. The models listed below have a 3,500 pound capacity. If you do not see your model then it will be…