Review of Lippert Trailer Leaf Spring Suspension - Axle Risers Single Square Torsion Axle - LC382741 Video

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part #LC382741 for square shaped axles or part #LC270682 for diamond shaped axles as Forest…

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

According to my research, your 2010 Forest River R-Pod M-173 travel trailer came with Dexter Torflex axles. Therefore, in order to lift the trailer you would need to use one of the following depending on which axle you have. If you have a #9 (2,000…

Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle - 2-7/8" Lift #K71-724-02. I recommend…

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a…

According to Lippert, the mounting nuts should be torqued to 120 ft-lbs for the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741.

I attached a link to this page that has the install instructions for the Axle Riser Kit #LC382741 that you referenced.

Thanks so much for the photo that was super helpful, and what the axle tag shows is that you have a #11 Dexter Torflex axle. We do have the correct lift kit for you, which is the following part: - Torflex Lift Kit - Tandem Axle #K71-724-02 This kit…

I highly recommend getting a weight distribution hitch with sway control, and the best option for your Forest River travel trailer with a loaded tongue weight near 500 lbs is from Equal-i-zer: - Equal-i-zer Weight Distribution with 4-Point Sway…

Appreciate that info, and we do have a lift kit designed specifically for Lippert torsion axles, and will give you 3-1/2 inches of lift, so long as it is a square torsion axle: - Square: Axle Riser Kit - Single Square Torsion Axle #LC382741

Yes, the open side of the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift part #LC382741 faces the tire. I have attached a diagram for your reference.

Thank you for the photo! I was able to pass this along to my contact at Lippert who helped me confirm that the correct lift kit for your axle is the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift #LC382741. Attached is a review…