How To Lift a Forest River R-Pod Trailer

Question

Question:

I need to lift my R-Pod for increased ground clearance. What do I need to do this?

asked by: BillyBob

0

Expert Reply:

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part # LC382741 for square shaped axles or part # LC270682 for diamond shaped axles as Forest River switched to Lippert Torsion Axles for the R-Pod in 2014. If you have a pre 2014 then you will need to use the Torflex Lift Kit part # K71-707-01 as Forest River used Dexter Torsion Axles before 2014.

I always recommend that you check the axle tag to make sure you indeed have a Lippert or Dexter torsion axle as well.

expert reply by: Conner L

0

Michael S.

4/3/2024

I would like to buy a lift kit for my 2010 R-pod 174 but I am unsure as to which kit I need. This is a 2010 trailer but the axle is a Lippert. Axle sticker info: Lippert; NV# 201331; Serial # 045- 001037674; GAWR 3500 lbs.; Mfg. Date 9/15/2009 Many Thanks

Reply

Answer 1

According to my research, your 2010 Forest River R-Pod M-173 travel trailer came with Dexter Torflex axles. Therefore, in order to lift the trailer you would need to use one of the following depending on which axle you have. If you have a #9 (2,000…

view full answer...

Answer 2

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

view full answer...

Answer 3

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 4

It looks like different year models of the Forest River R-Pod 195 had different fenders. If you have a full-fledged fender then the closest we have are the silver Fulton Single Axle Trailer Fenders w Top and Side Steps #F008595-2. It didn't look…

view full answer...

Answer 5

Since we know your R-Pod is newer than 2014 we know that your have the Lippert torsion style axles which means there are two different lift kits that will potentially fit. You will need to use the Axle Riser Kit part #LC382741 for square shaped axles…

view full answer...

Answer 6

According to my research your 2016 Forest River R-Pod 180 has a Lippert Torsion Axle. Therefore, if you have the diamond shaped axle then you will need to use the Axle Riser Kit part #LC270682 but if you have the square shaped axles then you will…

view full answer...

Answer 7

Thanks so much for the photos, and based on those, your 2018 Liberty Outdoors Little Guy Max travel trailer has a 3,500 lb Lippert square torsion axle, for which we do have the correct lift kit, which is the following: - Axle Riser Kit - Single…

view full answer...

Answer 8

The correct axle riser kit for your Lippert Torsion Axle is the part #LC382741. I confirmed with my contact at Lippert that the spacing for the mounting will match up and it is compatible with your mounting holes being on the top.

view full answer...

Answer 9

I attached two pictures to this page that show the install instructions for the Pop and Lock Custom Tailgate Handle #PL8675 you referenced as well as an install video link that we shot that will walk you through the entire process!

view full answer...

Answer 10

If you are referring to a lift kit then we have 2 different options for you to choose from if you have a Dexter Torflex axle. If you have a #9 Torflex axle with a 2,000 lb capacity then you want part #K71-723-01. Should you have a #10 Torflex axle…

view full answer...

Answer 11

For your LED Marker Light RV Side Cameras w/ Night Vision for Furrion Vision S Systems #FOS05TASF you will want to follow the wiring as provided below: RED: Connects to positive wire on running lights circuit. BROWN: Will connect to the positive wire…

view full answer...

Answer 12

We have a replacement converter section for your WF8955 with the part #PD4655V but this is not compatible with Lithium batteries. For a new converter and panel that would be compatible with lithium batteries at some point in your future you'd…

view full answer...

How To Lift a Forest River R-Pod Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching