Lift Kit For Lippert 3,500 lb Torsion Axle on No Boundaries Trailer

Question

Question:

I have a 2020 19.1 no boundaries with tandem Lippert 3,500 lb torsion axles. Wondering what lift kit I need to get 2-3in. Thanks

asked by: Justin N

0

Expert Reply:

Appreciate that info, and we do have a lift kit designed specifically for Lippert torsion axles, and will give you 3-1/2 inches of lift, so long as it is a square torsion axle:

- Square: Axle Riser Kit - Single Square Torsion Axle # LC382741

expert reply by: Kyle S

0

Answer 1

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 2

The correct lift kit to use on your Forest River R-Pod Trailer will depend on the year. If you have a post 2014 then you will need to use the Axle Riser Kit part #LC382741 for square shaped axles or part #LC270682 for diamond shaped axles as Forest…

view full answer...

Answer 3

I can tell you how to go about determining if a Lippert Axle Riser Kit will fit your trailer, but these are universal fits, and we don't have any way of knowing what specific axles are on any year, make, or model of trailer. So in order to…

view full answer...

Answer 4

Yes, the open side of the Axle Riser Kit - Single Square Torsion Axle - 3-1/2" Lift part #LC382741 faces the tire. I have attached a diagram for your reference.

view full answer...

Answer 5

The Axle Riser Kit - Single Square Torsion Axle part #LC382741 will lift both sides of the trailer frame up 3-1/2" to add clearance between the frame and the axle. To install the axle riser kit you want to raise the trailer one side at a time by…

view full answer...

Answer 6

There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…

view full answer...

Answer 7

Thank you for the pictures! I reached out to my contact at Dexter Axle who was able to confirm that you have #11 Torflex axles so the correct lift kit is part #K71-724-02. Since yours has top mounting holes you also need the bracket kit #DX57FR for…

view full answer...

Answer 8

That sounds like a great plan, the E-Track part #E19148 will provide a great tie-down point for securing the motorcycles. For tie-down rings you would want the #59131 and then for a wheel chock I would recommend the #3481731 because of how well it…

view full answer...

Answer 9

If you have a standard leaf spring axle and the leaf springs are mounted below the axle you could use the Dexter Trailer Springs Over-Under Conversion Kit #K71-384-00 (for 2-3/8" diameter axles) or part #K71-385-00 (for 3" diameter axles).…

view full answer...

Answer 10

The TruRyde Spindle Nut #165686 has an outer measurement of 1.45 inches. You will use a 1-1/2 inch socket on this castle nut or we usually use a channel lock for these installations. I've attached a video of an installation of a hub to assist.…

view full answer...

Answer 11

Sounds like you are asking about the wheel bolt pattern of the Dexter trailer hub part #84545BX. This has a bolt pattern of 5 on 4-1/2 inch which is the most common 5 bolt pattern for trailer wheels. I attached a picture and link for more info on…

view full answer...

Answer 12

The Dexter hub part number prefix 8-201 could refer to many items and includes many possible weight capacities. So the best way to go is to pull one hub, remove the bearings and find their stamped part numbers. If you happen to know the axle's…

view full answer...

Lift Kit For Lippert 3,500 lb Torsion Axle on No Boundaries Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching