Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM32161 Video

The metric size equivalent of the 18.5 x 8.5 - 8 tire size on your snowmobile trailer is the ST215/60-8 size, such as #AM1HP28 which is a tire only and #AM3H325 which is this tire size mounted on a galvanized 8-inch wheel with a 5-on-4-1/2-inch bolt…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

The reason it says not to put it on a boat trailer is because the Karrier ST205/75R14 Radial Trailer Tire item #AM32161 you referenced is on a steel wheel. For a spare tire that is better suited for a boat trailer I recommend the Loadstar ST205/75D14…

The clip that goes around 3 of the leaves of the 5-Leaf Spring part #e34SR that you referenced can go either in front of the axle or behind it. Either way would be perfectly fine. I attached an FAQ on trailer suspension for you to check out as well.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

The Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Wheel #AM32161 is not machine balanced - nor are any trailer tire and wheel combos. That said, it will be ready to install when you receive it. What happens is the manufacturers line up…

An ST205/75R14 tire with a load range D would generally have a maximum weight capacity of 2,100-lbs at 65 psi. For example, the Karrier Radial Trailer Tire, Item #AM10235, has a maximum load capacity of 2,040-lbs at 65 psi. Each tire can have a…

It's not common for the spindle number to be printed anywhere on the axle. That said, if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the…

The correct trailer idler hub for your boat trailer is the Trailer Idler Hub Assembly for 3,500-lb Axles part #AKIHUB-545-35-K or part #AKIHUB-545-35-EZ-K if you have zerk fittings on the spindle. These are both pre-greased so there is no mess to be…

From what I have found, the axle you are talking about is the T-35 85/68.5 measuring 85" hub face to hub face. This is not an axle we have a direct replacement for unfortunately. I do, however, have an available replacement option. The Timbren…

The #35545E-ST-89 does not come assembled. I attached a picture that shows how all of the components will show up. You will have to assemble everything like what is shown in the install video I attached.

From everything I could find, the AL-KO T35 axle will use the same 4-Bolt Pattern as the Dexter Electric Trailer Brake Kit #23-26-27. With that being said, the mounting flange bolt hole distance the will fit will be 2-7/8" apart on center, so I…