Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
Question:
Hello, I have to replace two hubs on my boat trailer, The kit I used to replace the bearing last spring was Bearing Kit L68149 L44649 Grease Seal 10-19 I.D. 1.719 for #84 Spindle Do you have a hub that would fit this trailer using those measurements? Id prefer one already packed with bearings and just needed to be put on the trailer. Thanks,
asked by: Keith F
Expert Reply:
The correct trailer idler hub for your boat trailer is the Trailer Idler Hub Assembly for 3,500-lb Axles part # AKIHUB-545-35-K or part # AKIHUB-545-35-EZ-K if you have zerk fittings on the spindle. These are both pre-greased so there is no mess to be had.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Spoke Wheel - 5 on 4-1/2 - Load Range D
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Video: etrailer Single Axle Trailer Fender with Backing Plate Installation
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Search Results: akihub~545~35~k
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: How to Find the Spindle Number on a Trailer Axle
- Search Results: l44649
- Search Results: weld on d rings
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 115919 Review
- Search Results: l68149
- Search Results: bt8
- Search Results: btr spindle
- Video: TryRyde Tang Type Replacement Spindle Washer Review
- Video: Review of Kenda Trailer Tires and Wheels - Tire with Wheel - AM32161
- Article: Dielectric Grease Review
- Q&A: Does Trailer Tire and Wheel Combo Come Mounted
- Q&A: What is the Best Grease for Trailer Bearings
- Video: Wesbar Wiring - Trailer Connectors - 002402 Review
- Search Results: akihub~545~2~lf~1k
- Q&A: Gaps Between Shackle Bolt Heads and Shackles on Double-Eye Trailer Suspension
- Q&A: Should I Stay With 13" Wheels Or Upgrade To 14 Wheels?
- Q&A: Replacement Idler Hub for Boat Trailer With 3500 lb Axle
- Shop: Trailer Hitch