Replacement for AL-KO T-35 3,500 Pound 85 Inch Axle

Question

Question:

I am looking for an axle to replace my existing axle but can’t find anything to match it. The model number on my existing axle is t35, it’s a 3500 lb al-ko axle. Would you have anything to match that?

asked by: Austin O

0

Expert Reply:

From what I have found, the axle you are talking about is the T-35 85/68.5 measuring 85" hub face to hub face. This is not an axle we have a direct replacement for unfortunately.

I do, however, have an available replacement option. The Timbren Axle-Less Trailer Suspension System # ASR3500S05 will be able to replace your existing axle. This system fits any frame width and provides a smooth, quiet, safe ride with a complete suspension replacement.. It is also available with electric brake hubs that have a 5 on 4-1/2" bolt pattern, # A35RS545E.

I have attached a video review of the system for your reference.

expert reply by: Robin H

0

Answer 1

Lippert, who make the Thomas Payne line of furniture, does not offer specific instructions for installing the Replacement Heater Pad #674864 that you referenced. Installing this heating pad requires more or less disassembling the couch cushions to…

view full answer...

Answer 2

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 3

The Timbren Axle-Less Trailer Suspension #ASR2KHDS09 you're looking at is actually not going to work with your trailer tires since this kit is only going to work with trailer wheels that are 16" or larger. So, instead I'd recommend going…

view full answer...

Answer 4

I assume this is a replacement axle, so in order to choose the correct one, you will need to know the dimensions of your current axle's hub-face to hub-face and spring center to spring center as in the diagram I have added, with A being the hub…

view full answer...

Answer 5

Currently the Vehicle Wiring Harness #C45FV is the only custom fit wiring harness available for your 2023 Mazda CX-50. This harness is for a 4-way flat connector that will fit most of the smaller trailers you may tow. This will likely be the most…

view full answer...

Answer 6

Timbren does make a 3,500 lb version of their axle less systems that has a 4 inch lift built into it. For that you'd want the part #ASR35HDS02. This is basically exactly what you listed wanting so this would be a great solution for you.

view full answer...

Answer 7

I can help you determine the right replacement 6,000 lb double-eye leaf springs for your trailer, though we don't have any way of knowing what specific ones that trailer needs and I couldn't find a reference to the part you mentioned.…

view full answer...

Answer 8

When a weight is listed for a trailer jack like the ARK Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels - Sidewind - 10" Lift - 770 lbs - Zinc #ORJW350D, it's referring to the maximum trailer tongue weight it can safely lift. For your…

view full answer...

Answer 9

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

view full answer...

Replacement for AL-KO T-35 3,500 Pound 85 Inch Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching