Review of Equal-i-zer Socket Pin Weight Distribution System - 90-03-9212 Video

A weigh distribution system is going to be a really good idea based on the weight and size of the camper you plan to tow. You have a heavier duty truck so typically sway won't be too bad but the WD system will do an excellent job preventing sway…

When a trailer is loaded properly it will have a tongue weight (TW) that is 10-15% of the total weight of the trailer. Since 1,800 lbs is exactly 15% of 12,000 lbs you haven't overloaded the TW on your trailer. The best percentage of TW for a…

The Equal-I-Zer part #EQ64FR that you referenced can fit trailer frames that are up to 8 inches tall so it would work great on your trailer frame that is 8 inches tall.

There are differences that the colors reference for the Type 1 Propane connectors based on the spring tension and flow rate. The light green connectors are rated for Rated for 200,000 Btu per hour. The black are rated for 70,000-100,000 Btu per hour.…

Thanks for all of the info! It sounds like you're needing the 12' MB Sturgis Propane Adapter Hose #100040-144-MBS which has 3/8" Male NPT x 3/8" Female Flare Swivel ends. Propane fittings can be confusing because they go by the…

The Demco Channel Tongue Trailer Coupler #DM15629-52 has a 7-3/4" channel from the back of the coupler to the inside lip near the ball latch.

We have hoses like what you are looking for such as the part #100040-144-MBS which is a 12 foot hose designed to go from a propane regulator to your trailer's gas piping system. I attached a page that has all of the sizes we carry too.

To add a 100 lb tank to your two 30 lb tanks, I recommend the MB Sturgis Sturgi-Stay T-Fitting w Hose - Type 1 Valve - Quick Disconnect, Disposable Cylinder Ports #103615. This will allow you to connect the red fitting to one of your tanks and the…