Draw-Tite Ball Mounts - Fixed Ball Mount - 36053 Review Video

The Curt Class II Euro Style Drawbar with 1-7/8" Ball #C45591 will fit a 1-1/4 inch trailer hitch receiver and secure to the hitch with Pin and Clip #F-4 but I wouldn't be able to tell you if it will fit a European trailer. It has a 1-7/8…

For a 2 inch ball to use in the ball mount part #36053 you would want the part #19258. For a 1-7/8 inch ball you would want the part #19254. Both of these balls have shank diameters of 3/4 inches. Length of the threaded portion of the shank isn't…

The Pollak 5-Pole, Round Pin Trailer Wiring Sockets, item #PK11502, and #PK11501, do not have a standardized wiring configuration. I normally direct my customers to the 6-way wiring configuration, eliminating the middle pin. Start by wiring the top…

There is no standard diagram for the 5-way round connector, item #PK11501. You will need to use a circuit tester, item #PTW2993, to test the wires and wire the vehicle and trailer to match. When wiring, your green wire will be right turn/brake, the…

Although there are no wiring diagrams available for the #PK11501, when looking at the front of the harness the 12 o'clock pin is the tail lights (brown wire) the 2 o'clock pin is the aux circuit (red), the 5 o'clock pin is the right…

For your 2014 Mini Cooper hardtop with the single side exhaust and spare tire underneath you will need the EcoHitch Hidden Trailer Hitch Receiver #306-X7290. The EcoHitch #EH47FR that you are looking at is only compatible with the John Cooper Works…

Class I and class II hitches both have an 1-1/4 x 1-1/4 inch receiver openings. However, a class I hitch has a towing capacity of 2000 lbs and a tongue weight of 200 lbs, a class II hitch has a towing capacity of 3500 lbs and a tongue weight of 300…

On the Draw-Tite Class I Trailer Hitch, #24792, for the 2008 Honda CR-V, you will need #3592. On a Class I trailer hitch you can only use the ball mount that is recommended for the hitch, because it will have the correct rise or drop needed to tow a…

I do have a solution for you, however all of our available ball mounts for 1-1/4 inch receivers feature a ball hole diameter of 3/4 inches. I recommend simply going with a new 50mm hitch ball like the Draw-Tite #63912, which features a 3/4 inch…

Curt ball mount #C45503 measures approximately 7-3/4 to 7-13/16 inches from the center of the hitch pin hole to the center of the ball hole. From the center of the hitch pin hole to the nearest part of the welded-on ball platform it is approximately…

It is very unusual for 4-pole trailer wiring to get hot enough to melt the 4-pole plug. This wiring format carries only basic lighting signals, no trailer brake power, no reverse lights and no auxiliary 12V power. It would be much more common for an…