Draw-Tite Drawbar Review 3593 Video

Yes, the Draw Tite hitch part #DT43GR does fit the 2023 Kia Rio models.

When replacing shackle straps they should be the same length as the ones that were previously on your tandem axle trailer; replacing them with longer straps will result in additional play in your trailer suspension which could lead to additional wear…

When we installed the Draw-Tite Sportframe Trailer Hitch Receiver #24872 on a 2014 Ford Focus Hatchback in our shop we found the receiver height to be 10-3/4" from the ground. The Draw-Tite Drawbar #3593 gives you a 2-1/8" rise so that…

We do indeed have the Curt trailer hitch receiver that fits your 2013 Honda Accord Sport, which is the following part number: - Curt Trailer Hitch Receiver #C11681 I verified this fit directly with Curt for you.

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

Sounds like you are experiencing a lot of movement in your suspension which is causing the elongation of the back hanger bolt holes. Over time this is going to happen with normal wear, but most likely the wider hangers and narrower springs are…

According to the owner's manual for your 2018 Toyota Corolla, "Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair,…

I have two options for Stealth Hitches that fit your 2022 Tesla Model 3 depending on what you will be using the hitch for. The Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item #391TES317T has an included wiring harness and ball mount…

The Curt Class I trailer hitch (part 11498) should work great for you. I have a hitch that is similar to this and all you will see coming out from under your back bumper is the receiver opening. Note: you will need to do some fascia trimming and…

Yes! I am happy to confirm that the Curt Hitch - 1-1/4" #C11383 comes with all installation hardware included for your 2012 Mazda 3 hatchback. I went ahead and attached the hardware list from the instructional manual of the hitch.

On the coupler typically you will see the size hitch ball it is designed to fit stamped or printed. It is possible that somebody removed he original coupler that was on your trailer and replaced it with one that has a 2 inch ball. Especially…

We do offer a few different hitch receivers for your 2015 Kia Soul. I have included a link to these for you. I recommend going with the Draw-Tite Sportframe Trailer Hitch Receiver, #24915. This hitch installs with no drilling or welding required and…