Dexter Axle Trailer Axles - Leaf Spring Suspension - T20BTR-7258 Review Video

I spoke to my contact at Timbren and he said the deflection or amount of travel for the Timbren Axle-Less Suspension System #A20RS545 is 1-3/4 inches. The clearance between the spindle support and the trailer frame when fully compressed will vary…

Off road tires tend to have a more aggressive tread pattern and can be wider/taller. Generally speaking most all trailer tires are regular tires. There are some turf tires and off road tires out there that would fall into this category but if you are…

Speed is a huge issue with trailer tires actually. Unless otherwise noted trailer tires are rated as 65 miles per hour as their max speed. Exceeding the speed rating will cause the tire to heat up and fail easier. We do have a couple brands that have…

Ways to raise the height of a trailer for better ground clearance include using larger wheels/tires and installing an axle over-under kit that reverses the placement of the springs and axle. An axle over-under kit (we offer two) will give you a…

In the 4-on-4 wheel bolt pattern we offer trailer wheels/tires from 8-inch up to 14-inch diameter, but no 15s. The available products in this bolt pattern are shown on the linked page. The highest weight capacity wheel/tire in this 4-on-4 pattern is…

With you having 2- 3500lb axles your maximum capacity is 7000lbs evenly distributed over both axles. With the trailer weight of 8240lbs you definitely risk damaging the axles, suspension and other parts of the trailer. Trailer Axles will sometimes…

The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can…

With The Dexter Trailer Axle Beam with Standard Spindles - 72 inch Long - 2,000 pounds #T20BTR-7258 the correct bearing kit you would need is The Bearing Kit, L44649 Inner/Outer Bearings, 10-60 Seal #BK1-150. The grease seals ID is 1.500. I attached…

The two axles you referenced, the Dexter part #20545I-EZ-72-15 and the etrailer #e37YR are essentially the same axle made by two different companies but the specs are the same. They are both 2,000 lb axles that are 72 inches long with spring center…

Unfortunately, we do not have any hubs that match the dimensions you provided. The only other option I have for you at this time would be to replace the axle. If you can provide me with the hub face to hub face and spring center to spring center…

The first thing to try to is add some penetrating oil like WD40 and let it sit for awhile. You can then try tapping the bearing to try and remove it. You don't want to hit it too hard because you can damage the spindle. It is possible that the…

Although your current axles may be scavenged and do not match, I would recommend measuring them assuming your current wheels and tires are riding where you want them to. This would be a good point of reference for an axle length. For this you will…