Review of TRC Enclosed Trailer Parts - 36281-955 Video

I spoke to TRC and they said the inside channel of the H-Channel for Enclosed Trailer part # 36281-955 is 1.027" wide.

Here is a list of the tools needed to install the etrailer Enclosed Trailer Transition Plate #e32JR: - Tape Measure - Drill - Hex Drive Socket Adapter - 10mm Socket - 13mm Socket I have also added a link below to the instructions of the #e32JR for…

The smaller section of the Z-Rail for Enclosed Trailer #362417-955 is approximately 3/4" tall, while the larger section is approximately 1-1/4" tall.

For the clearance light part #AL91RB we have the grommet part #A91GB which is basically a hard rubber.

As long as your existing hub drums are in good condition (no grooves worn in the armature surface that the brake magnet rides on or the surface that the pads grab), and the 10x2-1/4 inch brake assemblies you referenced are compatible with the inside…

The C-Channel for Enclosed Trailer #362213-955 has an opening of 1.027". I have included an image below with all the dimensions for this item.

I just went back to the warehouse and measured the Z-Rail for Enclosed Trailer - 93-1/2" Long x 2" Tall x 1-1/2" Deep item #362417-955. It is 1/16" thick. You can cut it down to the dimensions you requested but we do not offer…

We likely have an option for you to replace your trailer's tack room lock, but there are no specific replacement parts for your trailer, and we don't have a way of looking anything up, so the best we can do is offer you a way to choose your…

Yes, since the hub you currently have has 8-247 stamped on it the Trailer Hub part #8-247-50UC3-EZ that you referenced would be the correct hub for you to use. This hub is 10 by 2-1/4 inch and has a 5 on 4-1/2 inch bolt pattern.

The shank would be the piece that you insert into the hitch receiver. So for a hitch cover like the Star Wars Darth Vader Trailer Hitch Cover #PC002282R01, there are 2 different shank options you can place the Darth Vader cover piece on so it will…

The correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part #MC44AB for amber and part #MC44RB for red.

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…