Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3-EZ Video

While we don't carry that specific part number essentially it is just a 3,500 lb trailer axle hub/drum that has a 6 on 5-1/2 inch bolt pattern like the Dexter #84656UC3-EZ so this would work perfectly for you.

The Dexter Trailer Hub and Drum Assembly #K08-201-9B that you referenced has a stud length of 1-1/4 inches which is the standard length for trailer hubs like yours.

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

The longest trailer hitch extender for a 2" trailer hitch is 18", the Hitch Extender For 2" Trailer Hitch Receiver 18" part #HE18. If you were to go any further than this then the weight capacity of the trailer hitch would be…

The Tow ready Combo Bar, part #80948 you asked about has a 2-1/2 inch X 2-1/2 inch outside dimension with a 2 inch trailer receiver opening. This bar is 48 inches long. I have attached a product review video you can check out.

Yes, the inside dimensions of the entire length of the Tow Ready Combo Bar #80948 that you referenced is 2 inch by 2 inch.

Typically the distance from the center of the hitch pin hole on a 1-1/4 inch hitch to the face of the opening on the hitch measures 2 inches whereas on a 2 inch hitch the distance is 2-1/2 inches.

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

The differences from trailer wheels, like the Dexstar Conventional Steel Wheel with Offset #AM20504 that you referenced, and vehicle wheels, like GM OEM wheels, can vary based on a lot of things. Trailer wheels are specifically designed to be used…

We do not recommend that you exceed your trailer's carrying capacity. You will be limited to your axle's rating. The 3-leaf slipper springs, #SP-039275, that we offer measure 24-1/4" long x 1-3/4" wide. These springs are designed…

The recommended space between tires on a tandem or triple axle trailer is around 4". If you were to replace ST205/75R15 tires with ST235/75R15 like the Taskmaster Radial Off-Road Trailer Tire part #TA45RR then you'd lose around .9"…

The Dexter Hydraulic Trailer Brake Kit #23-342-343 is the correct kit for you. This hydraulic drum brake assembly is designed for use with your surge-type trailer brake actuator. The brake's free-backing design lets you reverse without trailer…