Review of Timbren Trailer Leaf Spring Suspension - Axleless System - ASR1THDS01 Video

While we don't carry that specific part number essentially it is just a 3,500 lb trailer axle hub/drum that has a 6 on 5-1/2 inch bolt pattern like the Dexter #84656UC3-EZ so this would work perfectly for you.

We do not recommend that you exceed your trailer's carrying capacity. You will be limited to your axle's rating. The 3-leaf slipper springs, #SP-039275, that we offer measure 24-1/4" long x 1-3/4" wide. These springs are designed…

The differences from trailer wheels, like the Dexstar Conventional Steel Wheel with Offset #AM20504 that you referenced, and vehicle wheels, like GM OEM wheels, can vary based on a lot of things. Trailer wheels are specifically designed to be used…

The recommended space between tires on a tandem or triple axle trailer is around 4". If you were to replace ST205/75R15 tires with ST235/75R15 like the Taskmaster Radial Off-Road Trailer Tire part #TA45RR then you'd lose around .9"…

If you're looking for an idler hub, the #84545UC1-EZ you looked at will fit. The heavy duty Timbren Axle-Less Trailer Suspension #ASR1THDS01 uses a larger spindle with a 3,500 lb axle bearing combination. If you would like a hub and drum…

I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part #ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.

I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part #AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need…

It's typically not recommended to use spacers on trailer wheel applications so your best option would be the Timbren Heavy-Duty Axle-Less Trailer Suspension #ASR2KHDS02 which was designed for wider tires so it has a greater distance between the…

Since you want to use a larger wheel size you'd need to go with the higher rated Timbren Axle Less kit part #A35RS545. The wheel flange on the smaller hubs of the other kit can't accommodate the larger wheel diameters.

Off road tires tend to have a more aggressive tread pattern and can be wider/taller. Generally speaking most all trailer tires are regular tires. There are some turf tires and off road tires out there that would fall into this category but if you are…

The STUB spindles are shorter spindles that we don't carry, but if you are looking for an axle setup that's great for off-road applications the Timbren Axle Less kits like the #ASR2KHDS03 is a really great way to go. This kit has a 4 inch…

The Dexter Trailer Springs Over-Under Conversion Kit like part #K71-384-00 does not require welding. That said, it is recommended to tack the spring seats to the axle but this is super easy to do even for someone with no prior welding experience. It…