Dexter Axle Trailer Axles K71-707-02 Review Video

I wouldn't be concerned with the gap on the ends of your cross tube. The only thing that matters is that the 4 bolts that you use to install the #DT35MR are snug and secure. Assuming you have installed these correctly, and used the proper torque…

I checked with Firestone and they do not have any fit exclusions for the Firestone Ride part #F2582 on 2021 Ford F-150 models that have the 3.5 liter Powerboost engines.

The recommended minimum clearance between gooseneck trailer overhang and truck bed rails is 4-6 inches. I'd recommend 6 inches but a lot of people get by with just 4. Ideally you have at least 6 inches of clearance and the trailer is sitting…

To change your hub bolt pattern will require you to change hubs to one that has the bolt pattern you need. You will need to know what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a…

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't nose…

Since you have a Dexter Torflex 6k axle on your trailer the lift kit you referenced part #K71-725-02 is a confirmed fit and would give you a lift of 3-1/8 inches like you are looking for.

In order to raise your triple axle car trailer the amount you are looking for, you are going to need to install an axle flip kit along with a set of leaf spring hanger extensions. For an axle flip kit, I recommend the Dexter Trailer Springs…

I spoke to my contact at Dexter Axle and he said the reason that the Torflex Lift Kit - Tandem Axle - 3-1/8" Lift #K71-725-02 can not be used on 3" tall brackets is it would make your trailer too tall and it would cause the trailer to not…

From what I could find on the 2010 Keystone Fuzion Toy Hauler 405, it has 7,000 lb. ez lube triple axles that are already flipped. Given that information, the only thing that we would have is the Correct Track Trailer Alignment and Lift Kit #LC87120…

We can help you out here, and first, thanks so much for the photo it was super helpful. And based on that I can tell you that your tandem axle trailer with #10 Torflex axles is absolutely compatible with the Dexter lift kit: - Torflex Lift Kit -…

What you need is the Correct Track tandem lift kit part #RR23QX which will give your current suspension setup a lift of up to 2-1/4 inches. Aside from that there isn't a way to gain additional height from the trailer.

The Dexter Torflex Lift Kits like the Tandem Axle #K71-725-02 that you referenced are only confirmed to work with Dexter Torflex axles. It's possible that the spacers will fit with your AL-KO axles but this has not been tested. The spacers for…