Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 5 Bolt Flange - 3,500 lbs
(300 reviews)
Price: $1,253.64
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 5 Bolt Flange - 3,500 lbs
Item # ASR35HDS05
Our Price: $1,253.64
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (300)
- Q & A (0)
- Photos
Timbren Trailer Axles - ASR35HDS05
- 3500 lbs
- Universal Fit
- Spindles Only
- Lift - 4 Inch
- Rubber Spring Suspension
- Timbren
- Easy Lube Spindles
Get more clearance and a smoother ride when towing with Axle-Less trailer suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" lift spindle raises deck height for additional clearance. Fits any trailer frame width.
Features:
- Delivers a smooth, stable, quiet ride - regardless of load size
- Jounce springs absorb road shock and support trailer's load
- Rebound springs minimize body roll, rattle, and bottoming out
- Built-in camber and toe-in reduce wear on your trailer's tires
- Units work independently - what affects one side of your trailer won't affect the other
- Eliminates axle beam to increase ground clearance and fit any trailer frame width
- System replaces 1 trailer axle and suspension components
- 2 Separate units bolt directly to your trailer's frame
- Designed for your overlanding or off-road adventures
- Robust, heavy-gauge steel construction is built to handle abuse
- Black powder coat resists rust and corrosion
- Raises trailer deck height for maximum ground clearance
- 4" Lift spindle is built in
- Allows for simple bearing maintenance with built-in grease zerks
Specs:
- Application: single- and tandem-axle trailers that use regular tires
- Tandem-axle trailers require 2 complete systems
- Not recommended for triple-axle trailers
- Quantity: 2 suspension units (without hubs)
- Weight capacity: 3,500 lbs
- Brake flange configuration: 5 bolt
- Bolt hole diameter: 5/8"
- Suspension travel: 2-5/8"
- 3-Year limited warranty
Tire, Wheel, and Hub Compatibility
- Tire size: 35 x 12.5 x 20 or smaller
- Wheel diameter: 16" or smaller
- This assumes a wheel with zero offset
- Bearings (sold separately)
- Inner: 25580
- Outer: 14125A or 15123
- Races (sold separately)
- Inner: 25520
- Outer: 142376 or 15245
- Seal: 10-36 (sold separately)
- Inner diameter: 2.250"
- Outer diameter: 3.376"
Note: This Axle-Less system requires crossbeam support. If your trailer frame doesn't have a crossmember in place, you can retrofit it with one, or you can add a support by running a piece of 2" x 3" steel tubing through the square holes cut into these units. You could also add a steel reinforcement bracket to the inside of the trailer frame.
Get more ground clearance and a more comfortable ride when you're towing with Timbren's Axle-Less trailer suspension. This suspension system provides great shock absorption to comfortably get you where you need to go and to protect your precious cargo as you travel - even on rough terrain. With 2 independently operating units, you'll get better handling when making tight turns. And because this system eliminates your axle and has lift spindles built in, you'll get maximum ground clearance.
Timbren Axle-Less Suspension vs. Other Suspension Systems
There are many suspension options for your trailer or camper. So, what makes Timbren Axle-Less different?
Axle-Less systems are a definitive upgrade over traditional leaf springs, in part because they allow you to do away with your thru-axle, allowing for maximum clearance. As you've probably noticed, having a leaf spring suspension means that your axle will always hang at least a few inches below your trailer's frame, resulting in limited ground clearance. This may make it difficult to navigate off-road terrain.
In addition, while leaf springs do a great job of supporting an even load, they may cause your trailer to bounce and rattle when it's empty or to bottom out with a heavy load. And they don't offer any type of shock absorption for a smooth ride - unless you have upgrades built in. With Timbren's Axle-Less system, gone are the days of dealing with these annoyances - this suspension is designed for a quiet, balanced ride, whether your trailer's fully loaded or empty.
A torsion axle is a step up in terms of shock absorption, and it provides more clearance than a traditional, leaf spring suspension, but that crossbeam will still hang down some. And if your torsion axle gets damaged in any way, it can't be repaired - you'll have to replace the entire thing with a setup that matches your exact trailer frame width.
With the Axle-Less system from Timbren, you won't have a low-hanging axle beam to get in the way when you want to go off-road. The lift spindles on this setup will also raise your deck height, making navigating off-road terrain way easier. And the rubber springs and independent operation both combine to absorb shock and deliver a smooth, easy ride. In addition, the Axle-Less system can be easily maintained over time, and it will fit any trailer frame width, so you don't have to worry about potentially ordering the wrong size like you might with other systems.
Another suspension upgrade on the market is Timbren's Silent Ride. This setup is a great option to reduce bounce and rattle because it has the same AEON rubber springs as the Axle-Less system. But the Silent Ride still requires an axle, so you won't get the same ground clearance or low deck height as you will with the Axle-Less suspension.
Timbren Axle-Less Suspension Parts
The Timbren Axle-Less suspension is designed with you in mind. All of the parts work together so you can tow your trailer comfortably - regardless of load size.
- The jounce spring supports the weight of your trailer and cargo. It easily absorbs road shock and is constructed of AEON heavy-duty, hollow rubber.
- The rebound spring delivers a smooth, stable ride - regardless of how much cargo is on the trailer. It controls the movement of the jounce spring to minimize trailer body roll, bounce, rattle, and bottoming out.
- The trailing arm with integrated hanger attaches the suspension to the side and bottom of the trailer frame.
- The control arm carries the spindle and the hub. It pivots on strong, long-lasting polyurethane bushings that never require lubrication.
- The E-Z Lube, 4" lift spindle is simple to grease. If damaged, it can be removed and replaced, saving you both time and money compared to a traditional axle.
- The built-in hole accepts 2" x 3" steel tubing (not included) to add support to your trailer's frame. The tubing sits higher than a trailer axle, providing additional ground clearance.
Installing the Timbren Axle-Less Suspension
The first step in installing the Timbren Axle-Less suspension is to make sure that the mounting points for each unit are directly across from each other. The easiest way to measure this is to mark the desired mounting points on your trailer's frame. Then measure the distance between these points and the center of your trailer coupler. These measurements (A and B) need to be within 1/8" to keep your trailer frame square.
Once you have your mounting points lined up, you'll be ready to install the system. Drill 3 holes into your trailer frame at the desired mounting points. Then bolt each unit to the frame with Grade 5, 5/8" bolts (not included).
Keep Your Trailer Frame Square
Because Timbren's Axle-Less system eliminates your trailer's thru-axle, you'll have to find another way to get the crossbeam support that keeps your trailer frame square. You have a few different options to do this depending on your application and how much fabricating you're comfortable doing.
If you're building a trailer, the best option is to begin building with the Timbren Axle-Less in mind and include a crossmember where you want to install the units on your frame. You can also retrofit an existing trailer with a crossmember.
If you don't have a crossmember where you want to install the Axle-Less system (and you don't want to add one), pick up a section of 2" x 3" steel tubing from a nearby weld shop. This tubing will serve as a support to keep your trailer square. It will hang only about an inch down from your trailer frame, providing more clearance than a thru-axle.
After you've mounted both of the units to your frame, you'll need to drill 3 holes into the steel tubing and into the built-in, square holes. Then, insert the tubing through the holes and secure it with 3 bolts (not included) on each side.
The last option is to fabricate a reinforcement bracket that can be attached to the inside of your trailer frame and to the Axle-Less suspension. It may be a little harder to fabricate a compatible bracket than to mount steel tubing, but you may get additional clearance with this method.
Dimensions of the Timbren Axle-Less Suspension
The following diagrams show measurements taken on the Timbren Axle-Less suspension system.
| A | B | C | D | E | F |
|---|---|---|---|---|---|
| 14-5/16" | 16-1/8" | 1-1/2" | 6-1/4" | 7-5/16" | 5" |
| G | H | I | J | K | L |
|---|---|---|---|---|---|
| 5-5/8" | 6-11/16" | 5-3/4" | 2-1/4" | 3-1/4" | 5-1/4" |
ASR35HDS05 Axleless Trailer Suspension System by Timbren - 4" Lift Spindle - Without Hubs - 3,500 lbs HD
Installation Details
Alternate Instructions
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 5 Bolt Flange - 3,500 lbs - ASR35HDS05
Average Customer Rating: 4.6 out of 5 stars (300 Customer Reviews)
Get more clearance and a smoother ride when towing with Axle-Less trailer suspension. Built-in shock absorption limits rattle and bottoming out. E-Z Lube, 4" lift spindle raises deck height for additional clearance. Fits any trailer frame width.by: Adv11611/19/2021
Fast service from etrailer sending me my Timbren kit. They are always very helpful. Unfortunately it looks like UPS mishandled one of the 3 boxes and had to re-tape it all over. I just rcv'd the shipment, so I will have to open the box when I get home and make sure everything is inside. This is no fault of etrailer, just the shipping companies these days.
by: Brent04/24/2022
revolutionary. i will never go back to a standard axle ever again. great ride and performance regardless of loading. no need for separate shocks is a real game changer too.
by: Michael 09/12/2021
by: Sean 07/28/2022
by: Brian 02/17/2021
by: Justin 05/14/2021
by: JB07/29/2022
The axle-less suspension worked very well for my boat trailer. The suspension was easy to attach to the trailer frame and provided a lower profile than the traditional leaf spring and axle system.
by: Jared01/10/2024
The service from etrailer has been great! They have been very helpful through the entire purchasing process. My one star is due to the quality of the product. First, for something as heavy duty as these are, you’d expect better packaging. On arrival, one of the spindles was sticking out of the box and the hand holds were torn on one of the other boxes. I was a little worried what I might find in the damaged box but everything seems to be intact. The disappointing part is the quality of the welds. For the price you are spending on these, I would expect a higher quality of fabrication. There is undercut in the welds that hold the three support plates together and big ol sloppy welds every where else. Unsure of what to do as my trailer has been designed around this suspension system.
by: Jon03/14/2023
I purchased the 3500 lb. set w/4" drop. Wish they made a 2" drop. Install was fairly easy, but most of your time will be consumed with alignment measurements, acquiring shims, and making adjustments. I was lucky to have a very square trailer frame. However, the "slop" in the all of the mounting bolts (especially, the spindle mounts) is more than the 1/8" window they specify. You will want to preload all bolts before tightening, and then measure for alignment/toe-in. The units are supposed to have camber built-in, but it's not near enough (more shims). Also, this suspension has more travel then the documents indicated. I had to re-mount my fenders 1" higher to keep the tires front hitting. When fully loaded, you might have 1" of travel left. All that being said, the ride is better than I anticipated. It's less bouncy than a torsion axle, and very quiet. If I was building a trailer from scratch, I would use this system, again.
by: Matthew 01/17/2023
It is important to know that your wheels are going to sit very tight to the trailer frame. I needed to add an extension to the hub for it to clear the sides of the camper I built.
by: Michael 04/26/2024
We made an amazing creation out of those two axle-less axles.
We made a large fuel cell that is used for offroad use and it has worked excellent this entire time.
They are really great products and we would love to work with them again.
Actually, we do a ton of social media stuff and youtube and if you ever have interest in sending us products to build content around, I would love to have the opportunity!
Thanks,
Michael Brandt
Garage Bound, LLC (On Youtube and Instagram and all the other socials)
by: Kevin06/02/2023
Very smooth pull. I'm very impressed on how the trailer pulls. My traditional axle trailer seemed to bounce a lot on the highway which made a lot of noise, but with the Timbren Axle-less that I installed on a new trailer, the trailer is so smooth and way less noise.
Great product.
by: dale04/21/2021
The trailer rides great down the road and no more worries about saltwater and rusty leaf springs. Not a cheap option but I’m very happy with the setup. When installing, just be sure to measure accurately and have sharp drill bits. A drill press type of guide also helps ensure correct drilling angles. The first picture is of a mounting gusset a local welding shop made. One is needed for each side and necessary to provide needed mounting strength-at least on my trailer frame. Pics 2 and 3 show the mounted suspension on one side of the trailer. Pic 4 shows the suspension on one side of the trailer with the axle attached and a separately purchased disc brake assembly mounted on it. Finally, pic 5 shows a 2” box channel between both suspension assemblies. Independent suspensions would have been nice, but I wanted to ensure trailer rigidity was maintained. So, after one year, so far, so good. It’s all smooth sailing down the highway.
by: Jake08/21/2023
Installed the Timbren Axle-less suspension a little over a year ago and approximately 5000 miles ago. I have been extremely satisfied with the installation and performance thus far and have had no issues. I also chose to install an optional crossmember for more strength using a 1/4" thick piece of 2x3 steel. I had to increase the weight capacity of my campers suspension due to renovating the interior completely and adding more weight. I also strengthened the frame to accommodate the extra weight. In addition to installing the Timbren 5200LB system I installed new 12" electric brakes and upgraded to 225/75R15 tires with E load range rating.
by: Jake08/18/2023
Installed the Timbren Axle-less suspension a little over a year ago and approximately 5000 miles ago. I have been extremely satisfied with the installation and performance thus far and have had no issues. I also chose to install an optional crossmember for more strength using a 1/4" thick piece of 2x3 steel. I had to increase the weight capacity of my campers suspension due to renovating the interior completely and adding more weight. I also strengthened the frame to accommodate the extra weight. In addition to installing the Timbren 5200LB system I installed new 12" electric brakes and upgraded to 225/75R15 tires with E load range rating.
by: Kelly F11/07/2018
Purchased 2 sets of the Timbren 1200 Axle-less systems for upgrading the suspension on an older 30' ft glider trailer. Single axle with small (13") tires made towing tough due to porpoising, dragging on drive entrances do to poor flotation; also German made and metric, no repair parts. GVW 2000 lbs equated to bouncy ride.
Dual sets now allow the trailer to ride over bumps and sharp inclines easily, smoothly, little bounce on country roads; porpoising is history. My glider now rides securely, safely, quietly.
Install time 4 1/2 hours (includes head-scratching). Results are outstanding, units are totally solid. Recommend the square tube interconnect, easy and quick - trailer frame was on the light side, so a precautionary fix. Clean look underneath.
Ordered 5 wheels w/tires, very nice.
Helpful neighbor so impressed he ordered a HD single set for his new DIY snowmobile trailer.
Customer satisfaction 100%, from phone order, online support, product information, immediate shipping, install instructions, followup... HIGHLY RECOMMENDED!
by: Quintin01/05/2021
Trailer suspension and disk brake performance is outstanding big big difference over leaf spring and electric drum brakes.
Installation required modifications to the frame to monut the timbren suspension
by: Chris07/02/2021
I used these axles in a different way than most would. I needed a trailer that was small, could handle tight switch-backs, carry 600 lbs and be light. I had this idea and as a retired design engineer I saw a great possibility in this axle. I have made four of these trailers now, one as a camp trailer, 2 for trail work for State Parks and one as a utility trailer.
by: James09/06/2022
Incredible system. Handled our Overland trek through Colorado and Moab. These axles on our 1917 Ford bed ran multiple Jeep Badge of Honor trails. The suspension handled flawlessly. Handles off camber rocks and drop offs smoothly. We ran the 4 inch lift and off road offset to fit the factory Jeep wheels.
by: David Johnson09/24/2019
I rebuilt a 4 x 8 trailer using the Timbren Axle-Less Trailer Leaf Spring Suspension and it works great. I would recommend it to others.
by: Austin12/22/2021
They have more pros than cons, but the second set I bought broke the flat plate that holds the spindle at about 8 months. The steel quality seemed less than I would expect since it basically peeled it back like a pop can as you can see in the pictures. Otherwise I like the clearance and ride. They last 2-3 years where the torsion axles I replaced would wear out in 4 months after driving down rough gravel roads. There is a grade zerk on the underside which I didn't realize until I bought the second set. That would have helped the first set last longer had I known about it.
by: Brian12/01/2022
I put these on an off-road trailer build. They have been fantastic! I've done many miles and they held up great. Highly recommend.
by: Salma12/23/2020
Timbren saved our RV road trip! The leafs on the axle on our 2018 Jayco TT came apart while driving in Maryland. We tried going to the manufacturer, but they were useless. Going to a RV mechanic meant being grounded for at least 2 months. Then we found Timbren. With the help of Timbren's excellent staff we purchased axle-less system through etrailer, who made sure we got as quick as possible. It came ahead of schedule, my husband installed the Timbren system and we were back on the road! The axle-less system is better than the original manufacturers. If you plan on taking your RV or TT farther than 100 miles GET THIS INSTALLED and get it through etrailer.
by: Matt K09/01/2016
These units install easily, are well made, and perform great! The trailer doesn't bounce around like you see a lot of trailers do while traveling down a bumpy road. I traveled some unpaved roads with no issues. I am certainly glad I went axleless. I installed with 15" tires. Problem is I didn't go big enough.
I intended to install on an existing trailer that I had. Changed my mind and built a new trailer. The new trailer came in heavier than I had planned. 2k pound capacity is now too small. I have to watch what I load the trailer with so I don't over load the suspension. I intend on buying the 3500 pound units when I have the money.
by: Al11/07/2023
Five star. shipping was slow. Product was great 14 K 14 plies under 2000 pounds independent suspension. Low fast and sassy. Yep that’s how I build them.
25
300
Show More Reviews
See what our Experts say about this Timbren Trailer Axles
- Timbren Axle-Less System to Replace Torsion Axle on 2020 Lance 1995 Travel TrailerWe have options for a suspension system for your 2020 Lance 1995 travel trailer, but it uses torsion axles, which are not something we offer, so the best alternative we can provide is an axle-less system, the Timbren Heavy-Duty Axle-Less Trailer Suspension. The Timbrens are simply bolted or welded on so you do not have to worry about finding an axle that meets any specific measurements. The simplest way to install it is to use a piece of 2-inch by 3-inch tubing through the integrated hole...
view full answer...
- Weight Capacity of Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS05 ExplainedI apologize for the confusion on that but the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS05 that you referenced is rated for 3,500 lb as an axle. Each of the springs on either side of the kit has a 2,000 lb capacity. So spring capacity-wise this has an overall 4,000 lb capacity but the spindles and other components are the limiting factor at 3,500 lb.
view full answer... - Amount of Travel for Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift SpindleThe deflection or travel of the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS05 is 2-5/8".
view full answer...
- Switching to Timbren Axle-Less Suspension for 2012 Coachmen Clipper I have a solution for you, but the Timbren Axle-Less Trailer suspension # TASR5200S05 is not the best option because of the stiffness of the springs that this system uses. The 5200-lb Axle-less system springs are meant to carry a much heavier load than the approximately 2500-lb Coachmen Clipper, and when you use an overrated suspension system you're potentially causing way more jostling, bouncing and in turn, wear and tear on your camper. The Timbren Heavy-Duty Axle-Less Trailer Suspension...
view full answer... - Recommended Timbren Axle-Less Suspension System To Replace Dexter Torflex On 2011 Jayco JayBecause you have axles mounted with a Norco bracket, you will not be able to lift your axles. You can increase your tire and wheel sizes to give you a little extra height within the limits of your current system. My recommendation is to change your axles out and use the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR35HDS05. This will lift your axle 4 inches and give you the Aeon Rubber suspension. If you prefer a 2 inch lift, you...
view full answer... - Timbren Axle-Less Suspension Kits with 4-Inches of LiftThe Timbren axle-less suspension kits are offered in either 4-on-4 or 5-on-4-1/2 bolt patterns; none is available with a 8-on-6-1/2 pattern idler hubs. All such kits are shown on the linked page. Several of these 3500-lb kits, parts # ASR3500S06, # ASR35HDS05 and # ASR35HDS02, offer the 4-inches of lift you want and come without hubs. You can use an idler hub or a hub/drum that takes the same inner and outer bearings.
view full answer... - Recommended Axle and Suspension System for 2015 Rockwood Freedom 1940LTDFor your 2015 Rockwood Freedom 1940 LTD, I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR35HDS05. This will give you the suspension components integrated into the axle-less spindles. With this kit, I recommend the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA along with the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2...
view full answer... - Recommended Timbren 3,500 Axle-Less System with 4 Inch Lift Spindle for Lance Trailer The only real difference between the Timbren Heavy-Duty Axle-Less Trailer Suspension with 4" Lift Spindle - 3,500 # ASR35HDS05 and the standard Timbren # ASR3500S06 is that the Heavy-Duty model features a larger spindle that would accommodate larger hubs and wheels. I am not sure why Timbren would have suggested the Heavy-Duty model for your application but the standard Timbren # ASR3500S06 features the capacity you need, the lift you are wanting, and would allow you to retain the use...
view full answer...
- What is the Load Capacity of the Timbren Axle-Less Trailer Suspension?The Timbren Heavy-Duty Axle-Less Trailer Suspension - 2,000 lbs # ASR2KHDS01 has a total weight capacity of 2,000 lbs instead of an individual capacity of 2,000 lbs each. For something that will give you greater capacity for your cargo, I recommend the Timbren Heavy-Duty Axle-Less Trailer Suspension - 3,500 lbs # ASR35HDS05. The 3,500 lbs weight capacity of this system will be what allows you to move the cargo you plan to haul. I've added a link to a video review of this product for...
view full answer... - Timbren Axle Less Kit for Trailer that Weighs 3,045 lbsSince your trailer weighs 3,045 lbs when loaded the 3,500 lb Timbren Axle Less kit part # ASR35HDS05 would be perfect unless you though you were going to eventually loaded down beyond 3,500 lbs. Then you'd want the # TASR5200S03 which has the higher 5,200 lb capacity. If you end up with too high of a capacity your ride quality might be a bit rougher.
view full answer... - How to Choose Replacement Axle for Trailer With Mobile Home AxleWe are going to have parts that will work for you, though the issue is your current mobile home axles; these are designed for one-time use (to move mobile home from Point A to Point B) and should not be used continually so you will need to replace them. In order to choose the correct replacement axle for your trailer you will need to know the dimensions of your current axle's hub face to hub face and spring center to spring center as in the diagram I have added; the other thing you need...
view full answer...
- Timbren Axle-Less Suspension System with Electric Brakes for a 3,200 Pound TrailerIn the trailer world there is no 5 on 6-1/2 bolt pattern. And besides that trailer tires and wheels are not rated for use on a vehicle just as vehicle tires and wheels are not rated for use on trailers. The issue is that trailer tires are built with a thicker sidewall than passenger vehicle tires. The thicker sidewall can handle more vertical load but do not work well when lateral forces are applied to them such as when on the turning axle of a vehicle. So you can use an Axle-less suspension...
view full answer... - Replacement Axle-Less System With Lift for 2022 Forest River Rockwood Mini Lite Travel TrailerWe do have an axle-less system that will provide your 2022 Rockwood Mini Lite with additional clearance. The Timbren Axle-Less Trailer Suspension System is what you need. Based on what I have found, you have 3,500 lb axles on your travel trailer. I recommend verifying this information to be sure. Assuming that is correct we have the following options: -Heavy-Duty 2" Lift Spindle - Standard Tires # TASR35HDS07 -Heavy-Duty 2" Lift Spindle - Off-Road Tires # TASR35HDS06 -Heavy-Duty 4" Lift...
view full answer... - Will 16 Inch Tires Fit Timbren Axle-Less Suspension System # ASR35HDS05As long as there is a hub that fits the spindle and has the bolt pattern needed for the wheels then yes the Timbren Axle-less system # ASR35HDS05 will work with 7.50-16 tires. For example hub # AKIHUB-655-6-EZ-K will accept 16 inch tires as long as the wheel has a 6 on 5-1/2 bolt pattern. I have linked a help article on determining wheel bolt patterns for you.
view full answer... - Recommended 4 inch Lift Spindles or System to Raise Deck Height of TrailerFor your specific application, we really only have one style of trailer axle and suspension that will work with your spring center to spring center dimensions. It is the Timbren Axle-Less Trailer Suspension System with 4 Inch Lift Spindle. This is available in 2000 lb # ASR2KHDS04, 3500 lb # ASR35HDS05, and 5200 lb # TASR5200S03. These can be used in tandem axle applications as well. Most snowmobile trailers will have a 3500 lbs axle when using 15 inch wheels if you want to be similar...
view full answer... - Timbren Axle Less Kit that Can Fit Jeep 5 on 5-1/2 inch Bolt Pattern HubThe 3,500 Timbren Axle Less kits like the part # ASR35HDS05 you referenced actually have 6k spindles on them so for hubs you have to go with the higher rated setups which unfortunately don't have any options in the Jeep bolt pattern you need. Could you get by with a lower rated Timbren Axle Less like the part # ASR1THDS03 which is a 2,200 lb axle and has 3,500 lb spindles so the hub you mentioned # 84555UC1-EZ would fit.
view full answer... - Lifted Axle Setup for Trailer with 3,000 lb GVWRThe Timbren Axle Less kit part # ASR35HDS05 would be your best option as it has a 4 inch lift built into it and has a 3,500 lb capacity. Then for idler hubs the part # 8-213-5UC1-EZ would be a great option which fit this spindle and also have a 6 on 5-1/2 inch bolt pattern.
view full answer... - Hubs for Timbren Axle-Less Trailer Suspension ASR35HDS05We do have hubs you can use with the 3,500 lb Timbren axle-less system, with the correct set up being the following: - Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - 3,500 lbs # ASR35HDS05 - Dexter Trailer Hub and Drum Assembly # 8-201-5UC3-EZ This hub comes with the bearings, races, and seal so you won't have to purchase anything else. I have added some links below to video reviews for you to check out as well if you'd like to take a look.
view full answer... - Replacement Leaf Spring for a 2011 Forest River Rockwood 1940LTDThanks for the picture and the measurement! If you measured your suspension with the trailer sitting on the ground the springs have stretched with the years of use and won't be 28" long. You're probably going to be closer to 27" which means you'll need the 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles item # e97SR or even 26" which you'd replace with the item # e77SR. To get an accurate measurement of the eye to eye distance you will want to jack up one side of your Rockwood trailer...
view full answer... - Are 3,500 Timbren Axle-Less Suspension System w/ Lift Weight Capacities for One Side or BothThat's a good question, and the weight capacities for the Timbren Axle-Less Suspension Systems are for the set (both sides). Just think of it like a normal axle with a 2,000 lb rating being for the entire axle as opposed to just a single side. So because you mentioned your fish house frame was 2,500 lbs semi-loaded you would definitely need to go with a 3,500 lb system. This application can work, it just installs by bolting onto your frame, though you do need to ensure there is enough...
view full answer... - Can I Use Idles Hubs Instead of Drums on the Timbren Axle-Less Trailer SuspensionYes the Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles part # 8-213-51UC1-EZ will work with the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS05. I was able to confirm that they use the same bearings. The reason that they say they are for drums is that typically there are brakes on larger trailers like what the spindles are designed for.
view full answer... - 16" Wheels for an Off Road Camper with 6 on 5-1/2" Hubs and Tires Needing 7" - 8" Wide RimsIt looks like you're looking for 16" wheels for your Idler Hub Assembly, part # AKIHUB-655-6-EZ-K, with tires that need a 7" - 8" wide wheel. Since this hub has a 6 on 5-1/2" bolt pattern, we can narrow all of this down to the only wheel we offer that meets all of these specifications. That wheel is the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel w/-8mm Offset, part # AM22657. It has a width of 7" and a weight capacity of 3200 pounds, so they also match your hubs' specs. As for the...
view full answer... - Recommended Suspension and Axle Upgrade For 2018 Grand Design 2800BHI have another option for you, but Trailer leaf springs are not designed for off-roading and can break when used in rough off-roading conditions. I do have a great option for you which is the Timbren Heavy Duty Axle-Less Suspension System # TASR35HDS04. This system has a 3500lb weight capacity which matches your current axles, but being the heavy duty version they are made of thicker metal making them a great option for off-roading. The Timbren # TASR35HDS04 will replace your current leaf...
view full answer... - Correct Lift Kit for #10 Torflex Single Axle on Lance 1575 TrailerA #9 Torflex axle is rated for 1,000 - 2,200 lbs so since your Lance 1575 weighs well over 2,200 lbs dry I'm confident you have a #10 Torflex axle (which can be rated for 2,300 - 4,000 lbs). With that in mind, since you have a single axle trailer you need the Torflex Lift Kit # K71-707-01 which provides 2-5/8" of lift. Please note that if you have it mounted from the top then you also need the Side-Mount Frame Installation Hardware Kit # DX54FR to complete the installation. Just please...
view full answer...
Do you have a question about this Trailer Axle?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Brian B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Noah M
Updated by:
Manda E
Updated by:
Ryan F
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Written by:
Laura H
Installed by:
Randy B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/21/2021
I will have our customer service team reach out to you.