Correct Lift Kit for Jayco Jay Feather Lite x17z

Question

Question:

Do you have anything i can use? i bought it to use on the beach as well as cross country. It only has like 6 ground clearance which would never work. I will try to attach pictures.

asked by: Steven D

0

Expert Reply:

The Jayco Jay Feather Lite x17z uses a Dexter Torflex Axle so we do have lift kits available. The correct one is the Torflex Lift Kit part # K71-707-01 for model #10 from 2,300 lbs to 4,000 lbs.

expert reply by: Conner L

0

Answer 1

How you would proceed will depend on which type of suspension your camper has, and who the manufacturer of the axle was. If it's a leaf spring axle, and the leaf springs are currently mounted to the underside of the axle, you can use an…

view full answer...

Answer 2

The "P12 Fremont" simply refers to where the axle is made and does not give any other type of information; you will need to know the specific type of Dexter Torflex axle you have in order to get the correct lift kit. Based on the GVWR of…

view full answer...

Answer 3

Suspension enhancement can be used with your weight distribution and will help with rear end sag. So the #CSS-1145R that fits your 2008 Toyota Highlander would help. You'll need to set your weight distribution up again.

view full answer...

Answer 4

It is possible to lift a trailer. You can do this by moving the axles from being above the leaf springs to below the leaf springs. The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3…

view full answer...

Answer 5

To choose a correct weight distribution system you need to find your trailer's loaded and ready to tow tongue weight combined with the amount of weight you have stored behind the rear axle of your 2007 Saab 9-7x. From my research the 2013 Jayco…

view full answer...

Answer 6

Thank you for the photo of the axle sticker; that's always helpful in helping us identify what you've got. That serial number is for a Torflex #10 axle, so the correct lift kit is the #K71-707-01 for a single axle or the #K71-707-02 if…

view full answer...

Answer 7

Can you get me the brand and capacity of the axles on your trailer?

view full answer...

Answer 8

Ball mounts like the Curt #C45100 are available in various lengths. This one happens to be 13-inches long, longer than some. Longer ball mounts are needed, for example, in cases of a truck having a slide in camper in the bed, or when using a…

view full answer...

Answer 9

There is a possibility of back feeding but this should not really be of a concern as the odds of it happening are slim to none. If you did choose to use a diode then you would need one rated for the components it would be powering. The highest rated…

view full answer...

Answer 10

A diode is designed to stop the reverse flow of current in an electrical circuit. Therefore yes, a diode will prevent backfeed to your vehicle from the trailer's battery. The part you referenced part #RM-790 has a dual in, single out function…

view full answer...

Answer 11

Given the information you provided, your 1995 Jayco 1006 ST has a Dexter Torflex #10 axle on it. The correct lift kit for that axle is the Torflex Lift Kit #K71-707-01. As you stated, this lift kit will not work with 3" high profile brackets.…

view full answer...

Answer 12

A load range D tire in the 205/75-15 size is not available. You would have to go up in size in order to get a load range D tire. Your existing tires have a width of 7.7 to 8.1 inches and a diameter of 27.4 inches. They fit on 15 by 5-1/2 inch wheels.…

view full answer...

Correct Lift Kit for Jayco Jay Feather Lite x17z

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching