Curt Hitch Adapters - Hitch Extender - C45796 Review Video

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

The Buyer's Products Adapter #337RTA302 is a much better option than using multiple sleeves. The XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches #SHP2040-XL has a 3.54 inch pin span that will work if the outer edges of your…

The hitch reducer we have for a 3 inch hitch receiver on a 2017 F-350 is the Buyer's Products Adapter #337RTA302. This will give you only a 3-7/8 inch extension while reducing the size of your receiver opening. If you need a longer extension, I…

Whether or not the capacity drops when using a reducer sleeve is something that the hitch manufacturer or Ford would have to tell you. I know that in some applications it does reduce the towing capacity and in others it does not. It probably would be…

The Curt Front Mount Trailer Hitch Receiver #C31078, which is confirmed to fit your 2018 Ford F-250, will actually sit about level with the air dam on the truck meaning it won't change the ground clearance at all. When installing the hitch you…

The only option that can work is a hitch extender that will reduce the capacity of your hitch by one-third. For that you will need to use an extender which does have a step on it, the Buyers Products 18 " Hitch Receiver Extension with Step…

It is safe to tow with a hitch extender like the Curt #C45796, but it is important to note that using any type of adapter, including an extender, reduces the weight capacity of your hitch by 50 percent.

The shank on the Hitch Extender For 2 inch Trailer Hitch Receiver 14 inches, item #HE12, is solid steel.

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

Using the Buyers Products hitch extender part #3371804017 with the ball mount part #BM20 would work well but you'd need to be really careful not to exceed the reduced capacity due to the hitch extender. The extender reduces the capacity of the…

Yes! For mounting the Malone TradeSport Ladder Rack #MAL55VR to your Toyota Tacoma, you need to use the included Toyota Tacoma fit kit hardware. This kit is designed specifically for your truck. I went ahead and attached a screenshot of this fit kit…