Curt Hitch Ball - Trailer Hitch Ball - C40034 Review Video

Depending on the capacity you need I do have some A-Frame jack options you might like. Take a look at the Ultimate Trailer Jack #322-RDJ-2K. It is more adjustable than other jacks and measures just 1-3/4" from the mounting bracket to the…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I…

- SEE SOLUTION UPDATE WITH PART #C32FV IN COMMENT SECTION BELOW - I have a brake controller recommendation but at this time it doesn't look like we (or our manufacturers) have any information or at least an adapter harness to fit with the wiring…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

Weight capacities are designed to tell you how much weight it can be used with and have it still be totally safe. The Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount #CAB-UM has a 5,000 lb weight capacity. If you are absolutely sure you'll…

Most of the Convert-a-Ball cushioned ball mounts like #AMSC2 have around 5 inches between the hitch pin hole and the closest edge of the platform. From my research a Towtector system requires 1-1/2 inches of space to be installed. So it depends on…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

For your Scamp trailer, the Lock N Roll Articulating Hitch - Adjustable Channel Mount - Vehicle Side - 11,000 lbs #336VS503 will work with the Lock N Roll Articulating Trailer Coupler for 2" Receivers - Trailer Side - 11,000 lbs #336TS510 you…

The Curt RockerBall Shock Absorbing part #C40047 only comes in a 2" ball at this time. You may consider using a ball mount like part #AMSC2HD that has a shock absorbing core with a 2-5/16" ball. The ball hole diameter is 1-1/4". If you…

Curt offers a solution that would provide additional shock absorption to help isolate the tow vehicle from the shock the trailer experiences on bumpy roads, while still allowing you to use your existing #C45250 ball mount. The Curt #C40047 RockerBall…

The minimum rise for adjustable ball mount #CAB-UM is approximately 2-1/2 inches. But unless you tow multiple trailers and need the adjustability of this ball mount I recommend a fixed ball mount with between 2 and 3 inches of rise. Covert-A-Ball has…