Curt 2 Inch Hitch Ball Review C40034 Video

Depending on the capacity you need I do have some A-Frame jack options you might like. Take a look at the Ultimate Trailer Jack #322-RDJ-2K. It is more adjustable than other jacks and measures just 1-3/4" from the mounting bracket to the bottom…

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

When it comes to The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2 inch and 2-5/16 inch Balls - 15K #C83WR and The Curt Pintle Hook with 2-5/16 inch Hitch Ball - Channel Mount - 20,000 pounds #C45922 will not work together. The Curt…

The distance between the bolt holes for the Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount #C45802 is 2-5/8" on center. Since that same measurement for the MaxxTow Adjustable-Height Ball Mount MT70067 is 1-1/2" on…

Yes, you can use a pintle hook with any of the Curt Rebellion XD Shock Absorbing Adjustable Ball Mounts like part #C83WR. You'd simply need the Curt Pintle Mount Attachment part #C79FR and any standard pintle hook like the Curt SecureLatch Pintle…

So we know you'll need a longer ball mount which we do offer, but what I need to know most is how much rise/drop you need so that your trailer will tow level. If you need a 2 inch rise we have the Curt part #C45270 which has a 2 inch rise and a…

The Stealth Hitch #SH33VR will definitely fit your 2018 BMW 328d xDrive Sports Wagon, but the included ball will only get you to 18 1/2 inches when measuring from the ground to the top of the ball. I went through all our replacement parts for Stealth…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

The trailer tongue weight or hitch weight is dynamic meaning that it will change as weight is added or removed from the trailer or if the weight in the trailer is moved around (front to back). You can manipulate the tongue weight by moving weight…

Typically the ball mounts that are longer or have large drops/rises have lower capacities than ones that are more standard in dimensions. This is designed to help take care of the capacity reduction question you mentioned since there isn't a hard…