Review of Convert-A-Ball Gooseneck Trailer Coupler - Coupler with Inner Tube Only - CG Video

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by 6…

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler part #CG is designed to be used with set screws, we cannot recommend you drill to use a pin. That said, it will still work on an inner tube with pre-drilled holes for the pins so there…

Actually I just checked with Convert a Ball and the pin weight (or tongue weight) for the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG that you referenced has been upgraded to 4,000 lbs and is no longer 2,000 lbs.

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler, #CG, fits inside of an outer tube that has a 4 inch inner diameter. If the outer tube on your existing trailer has an outer tube with a 4 inch inner diameter and it uses safety pins to…

If you only have a 1 inch lift you wouldn't need a spacer when installing the Air Lift Load Lifter 5000 part #AL88231 on your 2021 Ram 3500.

If you have a trailer wheel that has a 6 lug setup you are going to have a bolt pattern of 6 on 5-1/2 inches. This is the standard 6 lug wheel bolt pattern that trailer rims have. If you are unsure you can check out the help article I attached that…

There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle,…

We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…

We do have the Bulldog 2-Speed Jack #BD183401 without a spring return. This is a 10,000lb lift capacity 2-speed jack similar to the etrailer #TJD2SP-12000SP-F jack you found. The Bulldog requires a separate Handle #BD701466 as one is not included. We…

I've actually talked to Convert-A-Ball about their #CG gooseneck coupler before and there isn't really a maximum setting they can speak of. This is due to the amount of the inner tube that needs to be inside the outer tube being specified by…