What is Pin Weight Capacity for Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler # CG

Question

Question:

Why only 2000 lb tounge weight

asked by: Dennis

1

Helpful Expert Reply:

Actually I just checked with Convert a Ball and the pin weight (or tongue weight) for the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler # CG that you referenced has been upgraded to 4,000 lbs and is no longer 2,000 lbs.

expert reply by: Jameson C

1

Answer 1

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG will work in your gooseneck hitch so long as your outer tube is round with a 4-inch inside diameter and it has bolts to secure this inner tube component. Most gooseneck trailer outer…

view full answer...

Answer 2

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG that you referenced is an inner tube portion of a gooseneck hitch. The outer tube would have the set screws that secure it in place. I attached a picture that shows it installed for…

view full answer...

Answer 3

If we compare the Curt RockerBall #C67DR to a standard B&W gooseneck hitch ball like part #BWGNXA2000 the RockerBall is 3-3/4" taller. The B&W measures 4" from the center of the hitch pin hole to the base of the…

view full answer...

Answer 4

As long as your Big Tex Trailer has an existing 4" inner diameter outer tube, then you can use the Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler - Round - 30,000 lbs #CG to replace the inner tube of the gooseneck trailer coupler…

view full answer...

Answer 5

The Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler #CG is designed to work with the single set screw. The screw will press on the inner tube. You will not have a problem as long as you are not exceeding the towing capacity of 30,000 lbs…

view full answer...

Answer 6

The Curt RockerBall Shock Absorbing Gooseneck Hitch Ball part #C67DR is compatible with the following gooseneck hitches: Curt Double Lock (Round Receiver) Curt Double Lock EZr (Round Receiver) B&W Turnoverball (Square Receiver) If…

view full answer...

Answer 7

The Convert-A-Ball Trailer Coupler, part #CG does not have the holes as you mentioned for height adjustment. This coupler uses the 2 set screws on your coupler for securing the tube inside your trailer 4 inch\ outer tube. You will want to have your…

view full answer...

Answer 8

The Convert-A-Ball Trailer Coupler #CG is rated for 30,000 lbs of total trailer weight and 4,000 lbs of tongue weight. If your horse trailer's weight falls is under those capacities this coupler would work well for you. Tongue weight of a…

view full answer...

Answer 9

I called the supplier (Convert-A-Ball) and they said the Convert-A-Ball Trailer Coupler, #CG, can be welded, but recommended it be welded by a experienced welding shop. They also mentioned it would have to be welded at least 12 inches up from the…

view full answer...

Answer 10

Yes, the adapter plates are included with the Curt RockerBall Shock Absorbing Gooseneck Hitch Ball #C67DR. They serve as an adapter if you're using the ball with a B&W gooseneck hitch. This ball is also compatible with Curt Double Lock and…

view full answer...

Answer 11

I spoke with my contact at Convert-A-Ball about the pin weight capacity of their CG Cushioned Gooseneck Coupler. They list a 30,000 lb weight capacity for the coupler and a 4,000 lbs tongue, or pin weight. Since your 2400 lb pin weight isn't even…

view full answer...

Answer 12

The max vertical weight (or tongue weight) that the part #CG can handle is 4,000 lbs. It has a total trailer weight rating of 30,000 lbs. This also uses a 2-5/16 inch ball so based on that and the 30k capacity you need this would work for you.

view full answer...

What is Pin Weight Capacity for Convert-A-Ball Multi-Cushioned Gooseneck Trailer Coupler # CG

Product Page this Question was Asked From

Continue Researching