Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch Installation - 2022 GMC Sierra 2500 Video

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The correct B&W Turnoverball Gooseneck Hitch for your 2020 Chevy Silverado 2500 is the part #BWGNRK1020. This particular hitch model includes the custom mounting brackets for your new Silverado that will use existing holes in the frame rails so…

If the B and W Companion hitch is the #BWRVK3600 which fits the OEM rail kit of a Ram truck it can be used with a pivoting pin box like the Turning Point but if the hitch attaches to a gooseneck hitch via a center post then it can not be used with it…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

I spoke with Access. The Toolbox Edition Soft, Roll-Up Tonneau Cover, part #A62439, is designed to fit behind toolboxes that between 19" and 21". With yours being only a half-inch longer than that, they stated that it would be a tight fit,…

As you can see in the picture I've included, when rolled up the cover sits lower than a normal tool box. These tend to sit about 3-5 inches above the rails of the truck. The access Tollbox Edition Tonneau #A62439 will be around 4-1/2 inches when…

There are limited solutions for the tool box and rolling hard cover. I recommend the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85 cu ft - Bright Aluminum #UWS08297 or the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85…

I have a great tonneau cover for your 2022 Sierra 3500 that will accommodate your tool box and be long enough for an 8' bed. It is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover item #A62439. This cover is designed to fit behind your…

I do have an option for you, however I checked with Konig and they do not make a set of chains that are designed to fit the 265/60R20 size tires on your GMC Sierra 2500. Since your Sierra has very limited wheel well clearance (which is why they had…

The recommended minimum clearance between gooseneck trailer overhang and truck bed rails is 4-6 inches. I'd recommend 6 inches but a lot of people get by with just 4. Ideally you have at least 6 inches of clearance and the trailer is sitting…

To add a gooseneck hitch to your 2023 Chevy Silverado 3500 you will want the B&W Turnoverball Underbed Gooseneck Hitch item #BWGNRK1020. This hitch is custom fit and includes all hardware necessary to complete installation on your truck. It has a…

While the #C60692 requires a Chevrolet, Ford, GMC or Nissan puck system for installation and the #C60618 fits the Ram puck system, the #C60692 hitch ball will also fit a Ram truck but included safety chain loops will not. The #C60618 kit includes the…