Review of CURT Heavy Duty Receiver Hitch - Weld-On Hitch - C47CR Video

The trailer hitches we have available for the 2014 GMC Savana Van are designed to fit the full size van model. To see if these will fit your Cutaway version, I just recommend taking a couple measurements on the vehicle's frame. The trailer hitch…

The Draw-Tite Class III hitch you mentioned, part #41946 will fit a 2005 Chevy Express, but I couldn't say if it'll fit a motorhome on a cutaway van chassis. Usually the rear bumper structure at the rear of a motorhome is much different that…

I went to the warehouse and measured the Curt Trailer Hitch Receiver, part #C15703. I have attached a photo of the trailer hitch and have noted the dimensions you can check out. This is a Class V trailer hitch and it has a 2-1/2 inch receiver…

I will be happy to provide you with the dimensions and hole spacing on the brackets included with trailer hitch #41990-07 to see if it will work on your cab and chassis 2004 Ford F-550. I have included a picture with the measurements.

We do have some trailer hitch options for your 2010 GMC Savana Van but since it has the Cutaway Chassis there are no custom fit options that bolt right up to the frame so we will be looking at universal fits. For a universal fit option that is at…

The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis #3371801102 you were looking at measure 39" from center to center of the mounting holes as you can see in the included diagram, so depending where you measured…

Is the steel step bumper you have installed the factory bumper on your 2012 GMC Savana KUV Van?

The Replacement Controller and RF Remote for Lippert TV Lift System #LC253395 will not work on your existing RV T.V. lift due to the controller being specific to the motor. The motor, Lippert part 325978; has it's own pigtail that plugs into the…

I spoke to my contact at Lippert and they informed me that the #LC309690 rack on the lift is 30 inches and the size of the TV should limit the stroke. I have linked the TV Lift System with RF Remote to this page for your convenience.

To replace the factory hitch on your 2002 Ford E-350 Super Duty Van you can use the Draw-Tite Ultra Frame #41945 which has the bolt holes 38-5/8" apart (center on center). This hitch will be the perfect replacement for your factory hitch.…

The hitches available for your 2006 Ford E350 shuttle bus are going to be weld on hitches. I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" Item #41990-07. This hitch is designed for heavy duty…

Sounds like you are trying to wire up a 7-way on your 2006 Ram 2500 by tapping into the taillight circuits which are separate and standard trailer wiring combines the stop and turn signals. The solution for that problem is a converter box like part…