Timbren Rear Suspension Enhancement System Installation - 2015 Ram 2500 Video

Installing the Timbren #TDRTT3500E on a 2022 Ram 2500 is going to be a very simple no-drill process. Once the truck is on a lift, it may take all of 15-20 minutes to get them installed. We do encourage you to note to this customer that Timbren…

You will want a space between the Timbren Suspension Enhancement System - Rear Axle item #TDRTT3500E and your axle. The installation instructions call for a 1 inch gap. The only time there shouldn't be a space is when the rear of your 2022 Ram…

For the weight of your slide in camper the heavier duty Timbren kit part #TDRTT3500E that you referenced would be the way to go. This can provide up to an additional 8,000 lbs of suspension support so it will work well for your application.

The product I recommend to help with the bucking/lurching issue with your 2020 Dodge Ram 2500 is the Timbren Suspension Enhancement System - Rear Axle #TDRTT3500E.The Timbrens install in place of the factory bump stops shown in your picture.…

Since you will be hauling a slide-in camper on your 2018 Ram 2500 you will want to go with the 8,600 lb Timbren #TDRTT3500E. I checked with Timbren and their recommendation is if you have a slide-in camper the best option is the severe service kit,…

The Timbren Suspension Enhancement System #TDRTT3500E is their severe duty kit that is specifically designed to be used with slide in campers. It will fit with the coil spring suspension you have on the 2019 Ram 2500. Do note that these are designed…

Yes, to both of your questions. The SumoSprings Rebel Custom Helper Springs item #SS64VR you referenced do fit your 4WD 2022 Ram 2500 and are compatible with in bed hitches. These helper springs have a 3,000 lbs load leveling capacity.

You should not have a problem with the camper sliding out when you are using any of the Brophy Cable Camper Jacks. The jack is very stable because of the tripod base. That stability will make the jack very difficult to tip to the front or the back.…

You can indeed install a weight distribution hitch like the Equal-i-zer #EQ37100ET on a trailer with an I-beam frame, but you'll need to have pieces of steel plate welded to the trailer frame to box it in to provide a secure mounting location for…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

The SumoSprings are definitely the best choice for your 2022 Ram 2500. The Timbren will give you a rough ride when unloaded while SumoSprings have a minimal impact on unloaded ride quality. Also, the #TDRTT3500E is a severe service kit. The only…

For the heavy duty, single Timbrens like the #TDRTT3500E on your 2019 Ram 2500 that are for trucks with a camper or severe service vehicles, they will actually always be touching the axle. There are standard, double convoluted Timbrens that should…