Hub Availability to Fit Spindle with 1 inch Diameter Where Bearings Ride
Question:
The bearings I removed from my trailer axle are Timken 07100 bore 1.000 outer 1.968 width 0.559. Both inner and outer bearings are the same. No markings on axle regarding weight. Trailer title says gvw 3000 lbs. This trailer has hubs integrated into the wheels. I wish to upgrade to hubs with lugs.can you help me?
asked by: Bruce W
Helpful Expert Reply:
Can you verify the diameter of the spindle where the seals ride too? If that diameter is 1.24 inches combined with your bearings both having inner diameters of 1 inch we would have hubs that would fit.
The part # 8-258BTUC1 would give you a 5 on 4-1/4 inch bolt pattern hub that fits.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Recommended Replacement Hubs for Harbor Freight Trailer
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Can Jayco Pop Up Trailer with 4 Lug Hubs be Swapped to 5 Lug Hubs
- Q&A: Difference Between an Idler Hub and a Hub/Drum
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub for DICO 45264
- Q&A: What is the Angle of the CE Smith Roller-Style Guide-Ons for Boat Trailers
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Printable Trailer Bolt Hole Pattern Template