Brophy Hitch Adapters - Hitch Reducer - HT02 Review Video

You will need to use the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver #HT02 which will allow you to use your Thule T2 Pro XTR #TH23JV with a 1-1/4" shank in a 2" trailer hitch receiver. Since Thule does not…

I have a solution for you. You can't convert the Thule T2 Pro XTR 2 Bike Platform Rack #TH23JV to a 2 inch hitch according to my contact at Thule so you will need to use an adapter. I recommend using the Brophy Hitch Reducer 2" to…

Yes, we have the Curt Trailer Hitch Receiver #C68DR which will fit your 2024 Honda HR-V. This hitch has a GTW of 2,000 lbs, a tongue weight capacity of 200 lbs, and has a relatively simple bolt on install.

The Roadmaster Quiet hitch would be a great choice. You might actually need two of the Roadmaster Quiet Hitch Anti-Rattle Devices. You'll need part #RM-061-125 for the connection between your adapter and the receiver hitch, and the Quiet…

No, we do not. The only affordable way to use the 1-1/4" Thule T2 Pro XTR Bike Rack item #TH23JV in a 2" receiver is to use a reducer like the the Brophy item #HT02. This hitch reducer will not lower your vehicles tongue weight…

I do have an option for you but the shank on your Thule T2 Pro XTR 2 Bike Platform Rack part #TH83JV is not serviceable meaning you cannot switch it out for the 1-1/4" version. There is a dedicated version of the T2 Pro XTR for…

We sure can, but the Master Lock #605DAT lock you'd looked at isn't available keyed alike. We do have options for keyed alike coupler locks, however. I'd recommend a latch lock such as the etrailer brand #e98890 for a 7/8 inch…

The anti-rattle adapter I recommend is the No-Rattle Trailer Hitch Wedge, part #MPG908. This will work for 1-1/4 inch and 2 inch receivers and is designed to insert into the small gap that may exist on your receiver. You then tighten it up after it…

Thanks so much for the photos, they were very helpful, and based on that and the fact you mentioned it was from 2009, I am almost certain that what you have there is the Thule Roadway 914 bike rack. We do in fact have the correct 1-1/4" to…

So the answer is yes, with your 2-1/2 inch receiver you will still be able to use the Thule T2 Pro XTR Bike Rack #TH83JV. You are correct, however, that the your standard hitch reducer sleeve isn't going to work, so what you will need instead is…

Sounds like you are looking for an adapter like the part #HT02 which will convert your 2 inch hitch to a 1-1/4 inch hitch so that you can use your current bike rack in a 2 inch hitch.

Yes, the Thule T2 XTR part #TH23JV will both fit well in a Draw Tite Class I trailer hitch like what you have installed on your Toyota Prius V. I attached a review video for this rack installed in the hitch of a similar Prius as yours for you to…