Brophy Hitch Adapters - Hitch Extender - HES6 Review Video

The differences between the Yakima HoldUp #Y02443-2 and the HoldUp EVO #Y02479-2 include an integrated SpeedKnob to take out movement of the bike rack, an easier system for tilting the bike rack, and the ability to add fat bike tires (up to 5"…

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

The Thule T2 Pro XTR 2 Bike Platform Rack - 2" Hitches #TH83JV is designed to hold the bikes by the wheels. It is not recommended to use on bikes with fenders. For that application I recommend the Hollywood Racks Sport Rider SE #HLY84FR. This…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

If the trailer is less than 1 inch off of being perfectly level either up or down then it will be perfectly fine. Having it slightly higher would be better because presumably the tongue weight of the trailer will pull it down a little. You could also…

You will be able to slide the Lock N Roll 3-Position Adjustable Channel Bracket #336TS505 into the 2" receiver on the trailer. This will allow you to bolt in the Demco Trailer Coupler #DM14976-52 to attach to a 2" trailer ball.

Ideally a hitched trailer will be level to the ground. We often recommend starting off with the hitch ball being a bit higher - an inch or so - than the top of the coupler on the level trailer since once hitched there will be a degree of squat in the…

The only difference between buying the Channel Bracket #336TS505 and the Channel Mount #336VS503 separately is only the fact that they are purchased separately. It's the same thing so grab whichever one saves you the most money. ON the trailer…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The TowSmart Trailer Coupler Lock Kit - 1-7/8, 2, and 2-5/16 Couplers w/ Hitch Lock & Coupler Lock #TS84FR uses different lock cores/keys for different kits. Although they are not 100% unique, the odds that someone would order the same lock set…

The correct ball mount or draw bar for the Hidden Hitch Class I 1-1/4 Inch Hitch, part #24812, on your 2010 Toyota Matrix will be Draw-Tite Ball Mount, part #3593. When towing with a Class I or Class II trailer hitch, the ball mount that is…

There are a couple factors that play a part in if you are able to swap your tires from 8 inches to 12 inch. If you're running an 8 inch wheel odds are that you have a single axle trailer so that shouldn't be an issue. If you have fenders on…