Curt Class III Trailer Hitch Installation - 2019 Acura RDX Video

The trailer hitch receiver I recommend for your 2021 Acura RDX is the Curt #C95CR because it has a Class III rating and a 2" receiver opening so it can be utilized for a lot of different applications. This will fit with your spare tire but it…

The diameter of the hitch pin hole for the Curt #13241 trailer hitch receiver is 5/8 of an inch. A Pin and Clip, like part #C21500, is designed to fit into the hitch pin hole. You can use part #e98882 for an option that locks.

I have what you need! I went ahead and pulled the Curt Hitch #C95CR from the warehouse to measure for you. From the front of the receiver tube, the center of the pinhole is 1-7/8". From the rear of the receiver tube, the center of the pinhole is…

Is it possible you didn't install the blue fuse that comes with the Tekonsha trailer wiring kit part #118800 into the fuse holder that's on the power wire of the kit? Without this fuse installed no power would make it to the module. Worst…

The trailer wiring harness I recommend for a 2021 Acura RDX is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118800 which offers a plug and play install. It provides a 4-way flat connector which is the most common and…

While we do not have any images of the etrailer Trailer Hitch Receiver #e72AR installed on a 2019 Acura RDX you can see the similar Draw-Tite Receiver #76268 on the images I have included. One of the images is with it installed on a RDX that had the…

I recommend installing The etrailer Hitch #e72AR on your 2021 Acura RDX. We tried to install the #76902 on a 2020 Acura RDX and there was no holes for it to mount up to and not enough room between the spare tire and the rear fascia to fit it. The…

For your 2019 Acura RDX the hitch that sticks out the least is the etrailer Class III part #e72AR. Other options stick out around an inch more or so.

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C95CR will fit on 2021 Acura RDX, but with the factory trim piece it will not be very hidden. This receiver does offer a simple bolt-on installation process and requires no drilling…

The crossbar of the Curt 13423, which we refer to as part #C95CR is exposed, just like the Draw-Tite #76268 would be. I've linked to a photo showing what the Draw-Tite 76268 hitch looks like once installed, the Curt #C95CR would look almost…

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C95CR, will fit your 2022 Acura RDX. There are some issues that you should be aware of before installation. The first thing is your spare tire will have to be 18" or…

The American made Curt Class III Hitch Receiver #C95CR is a confirmed fit for all models of the 2022 Acura RDX, including the Advance package. With that said, 19" wheels cannot be stored under the vehicle as the hitch will sit inside of the…