Brophy RV and Camper Steps AHR5 Review Video

That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as…

We can set you up with new steps so that you love your whole camper setup, steps included. Based on the information you provided, I recommend taking a look at the Brophy Camper Scissor Steps #AS25. This is a 5-step assembly that can expand to between…

The Stromberg Carlson Rail Mate #AP-101 is intended for left hand mount. All 3 Brophy Handrails #AHR3 for 3-step scissor steps, #AHR4 for 4-step, and #AHR5 for 5-step can all be mounted on either side of the stairs. All 4 products are made to fit…

The 5 step TorkLift GlowSteps #TLA7505 could work for your 2022 Lance 825 truck camper, but require that you have an entry height of 38-1/2" to 46" of entry height. This is measured from the bottom of your door to the ground when parked on…

I reached out to Lippert and unfortunately the number you provided does not correspond to anything that will allow me to identify your pin box. If you got that information off of the sticker on your pin box try looking for a 4 digit number like 1621,…

When it comes to the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #325-GH-8045 and the #GY58GR, the main difference is the auto latch feature of the #GY58GR. This self-latching lever automatically engages when hitch ball is in socket…

The magnet clips #BP19005 should not be making contact with the drum while the brakes engage, so I do not think that is the problem. What I think is going on is it's just not seating all the way. These can get a little squished or deformed…

In order to find the correct set of landing gear legs for a trailer you need to measure the distance between the weld stops on the legs. The most common is 15-1/2" and likely what you have now and if that's the case you can use the Lippert…

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

That isn't a complaint that I have heard a lot of concerning the Bauer Products European Style RV Entry Door Lock #BA38AR. Finding a replacement hand rail could be a solution. I'm not sure what travel trailer you have or what hand rail set-up…

Yes, the Yakima Landing Pad 1 part #Y00221 does fit the Thule tracks like part #THTP54 that you referenced.

The Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs part #TH898 is not supposed to work with the Yakima CoreBar Crossbars but we have been able to make it fit with the Mounting Kit part #TH7520970001.