Is It Possible To Upgrade To 5 Step Truck Camper Steps To 2022 Lance 825 Truck Camper?

Question

Question:

looking for a 5 step upgrade to my 2022 Lance 825 truck camper that has the factory cut out for the pull out two step, this is too high when extended can you recommend or suggest a brand that will fit? and do I need a bracket for this to attach to the torklift glow steps? the lance model 825 OEM mount for this two step is 21 1/2 wide and 14inch depth

asked by: Donald R

0

Expert Reply:

The 5 step TorkLift GlowSteps # TLA7505 could work for your 2022 Lance 825 truck camper, but require that you have an entry height of 38-1/2" to 46" of entry height. This is measured from the bottom of your door to the ground when parked on level ground.

This system mounts directly to the body of the camper right below the door so it'll bypass your factory steps, but you need to make sure there's enough structure under the door to secure the steps.

If you find you have a different entry height just let me know.

expert reply by: Samuel C

0

Answer 1

I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs #TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing…

view full answer...

Answer 2

Installing the TorkLift GlowStep Scissor Steps #TLA7802-8000 on your truck bed camper will be similar to installing them on a trailer. The mounting bracket connects to the camper just under the doorway and the steps connect to the bracket. I've…

view full answer...

Answer 3

Since the Torklift Glowstep #TLA7804-8000 has an entry height range of 31 to 42 inches your height of 37 inches would work well.

view full answer...

Answer 4

I have a solution for you, but the TorkLift #TLA7843 require much more mounting space than you've got available on your 2020 Palomino SS1240. Because of the limited mounting space under your door, you'll need to use something similar to the…

view full answer...

Answer 5

The big difference is that the part #TLA7804-8000 does not come with a bracket for how it attaches to the truck whereas the part #TLA7834 does. The bracket is for a more permanent install where they'd fold up and store on the vehicle whereas…

view full answer...

Answer 6

We have 2 different 2-1/2" hitch receiver options for your 2024 Ram 5500 Cab and Chassis and the correct one just depends on what you're looking to get out of the hitch. The Curt #C15800 is your classic hitch receiver while the TorkLift…

view full answer...

Answer 7

I am sorry Mike but they do not. The HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR you referenced are not compatible with Atwood electric jacks. Additionally, there isn't a similar extension for Atwood…

view full answer...

Answer 8

The TorkLift Glow-Step scissor step assemblies #TLA7804-8000 and #TLA8103 are primarily intended for RV use but there will certainly be other applications where they will work just fine. The key is making sure you will not lose essential ground…

view full answer...

Answer 9

Traditionally trailer tires have been rated for a maximum speed of 65 mph. You wouldn't find a speed rating on the tire's sidewall and the 65 max was then assumed. Not too long ago tire manufacturers started testing their tires for faster…

view full answer...