Andersen Hitch Locks - Standard Pin Lock - AM3492 Review Video

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

There are three pins on the Pro Series Adjustable 3-Ball Mount part #63070; one to rotate the tri-ball assembly (spindle pin), one to remove the tri-ball assembly (shank pin), and one to hold the shank inside of the receiver tube (hitch pin). In…

The part you have pictured goes in at the very bottom of the front of the #DOM44FR and is labeled as part number 9 - Locking Handle in the owner's manual. There are brackets that yo can get separately to screw into the floor to secure the toilet…

The short answer is anywhere that you can! You may need to get some short cables to wrap around each frame rail then hold them together with quick links and attach the safety cables from the RV to the quick links. Set #BX88208 is a great option…

In order to secure your 2018 Harley Davidson Tri Glide I recommend using the Tow-Rax Wheel Chock part #TWSPWM for the front wheel so long as it is not greater than 6-1/2" wide. Then in order to secure the two rear wheels I recommend using an…

I have a solution for you, but the short answer is no, it does not. The Replacement Key for Andersen Hitch Receiver Locks and Locking Adjustment Pins #AM3499-2052 is code specific, so the key will only work on locks with a 2052 code. The codes for…

Since the Flash E Series Ball Mounts #FA42-00-2825 have aluminum, solid shanks you would have to use an Immbolizer like part #BX88224 to get rid of the movement between the shank of the ball mount and the hitch. There isn't a device that will…

For your trailer tongue lock part #379DAT the correct part number for a replacement key is the part #MLK1. But you will need to know what key number you need. If you do not know what key number is needed there is no way to know.

No, unfortunately a specific key number cannot be ordered for the Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches #2848DAT.

Unfortunately, the Roadmaster #RM-316 aren't available keyed alike in multiples greater than the included 2. This being said, I might have an option that would allow you to get as many similar locks as you'd like that would be keyed alike.…

When using the TireMinder i10 TPMS for RVs #TM29FR, it is recommended to not use valve extenders. Obviously this is not always possible. But the manufacturer does state that if you do need extenders, you should use straight extenders that are steel…