Dexstar Tires and Wheels - Wheel Only - AM20759 Review Video

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

The difference in tire diameter will be an additional 2-1/2 inches going from the 225/75-15 which measure 28.4 to the 235/80-16 which measure 30.9 inches. As a general rule of thumb the minimum safe distance between front and rear tires on the same…

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…

Generally trailer tires should be replaced every 5 to 6 years regardless of mileage and use. This "clock" can be started once the tires are mounted to your trailer, assuming they were stored in a controlled environment between the…

I do have an option for you but there aren't any custom fit trailer hitch options for a 2006 Thomas School Bus. That said, we do still have universal options which can be installed either via welding or cutting/drilling. For this, I recommend the…

Given that your vehicle is not listed on our fitguide for available hitches, one option with your provided dimensions is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver #41990-07. With this hitch, you will be able to adjust the 9-1/2…

Thanks for the picture of what you have and the info you listed. The correct wheel you need is the part #AM20794 that you referenced.

You can't use conical/tapered lug nuts like the #12CLN on wheels with flat bolt seats; instead you'll want to use a lug nut with a flange like the Flange Wheel Nut - 5/8" #95188. If you can tell me which wheels you've got and the lug…

In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll…

We have kits for that but you would need to know the diameter of your axles to determine which kit you would need. If the axle diameter is 2-3/8 inch which is common for 3,500 lb axles the kit you would need is the part #K71-384-00. If instead you…

It is possible to have a center spring hanger that will be longer than the front and rear hangers. For an example I would have the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs, part #APT3HD. This kit has 2-1/2 inch tall front and rear…

When you replace the axles on a trailer you will look at the (A) hub-face-to-hub-face and the (B) spring-center-to-spring-center measurements and choose an axle that has the same measurements that your current axle does. Since you are wanting to add…