Parts Needed to Convert Overslung Trailer Axle to Underslung
Question:
I have a 2005 Fleetwood Scorpion S1 pop up camper. The trailer was overslung when I bought it a few years ago I am not sure if that is standard and I find that makes loading toys onto the deck and climbing into the trailer more difficult than I would like. What would be needed to change this trailer to an underslung setup?
asked by: Stephen L
Expert Reply:
We have kits for that but you would need to know the diameter of your axles to determine which kit you would need. If the axle diameter is 2-3/8 inch which is common for 3,500 lb axles the kit you would need is the part # K71-384-00. If instead you have 3 inch diameter axles you'd want the part # K71-385-00.
Products Referenced in This Question
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 3 Inch
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Leaf Spring Suspension
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Q&A: How To Relocate Leaf Springs Above Trailer Axle for More Ground Clearance
- Article: How to Measure for Trailer Hitch Drop
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Mounting Brackets for Trailer Fender - 8"/12" Wheels - Galvanized Steel - Qty 2
- Video: Dexstar Tires and Wheels - Wheel Only - AM20759 Review
- Shop: CE Smith Double U-Bolt Bolster Bracket - Galvanized Steel - 8-3/4" Tall - Qty 1
- Video: Review of Lippert Replacement Lock Nut For Tandem Axle Lift Kit - LC44UD
- Shop: CE Smith Heavy Duty, Vertical Bunk Brackets - 90 Degree - Galvanized Steel - 8" Tall - Qty 2
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Shop: Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2
- Q&A: What is Difference Between Overslung and Underslung Trailer Coupler
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: Where to Position the Trailer Axle?
- Video: CE Smith Boat Trailer Parts CE10200G Review
- Q&A: How To Use 17.5" Wheels On a 7,000 Lb Trailer Axle
- Q&A: Which Lug Nuts To Use on 17.5" Trailer Wheels
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10160GA-2 Review
- Q&A: Thickness of Plate on the CE Smith U-Bolt Kit # CE23102
- Q&A: Proper Spacing Between the Hub Face and Spring Center Locations for 7,000-lb Triple Axles
- Q&A: Could Timbren Axle Less Kit be Used to Replace Dexter Torflex Trailer Axle
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-385-81SP Review
- Search Results: spring seat
- Video: etrailer A-Frame Trailer Coupler - Standard Coupler - CA-5335-B Review
- Shop: Trailer Wiring
- Search Results: trailer axles
- Search Results: dexter trailer lift kit
- Search Results: galvanized axle