etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-865-7-2-EZ-K Review Video

Brake assemblies have left and right hand orientations so it'd important to ensure you're choosing the correct parts for your assemblies. We do offer the BP04-171 with part #K71-673, but we don't currently offer the BP04-172.…

From previous customer questions it sounds like the hub you have is similar to the Dexter Trailer Hub and Drum Assembly #42866UC3-EZ. This is compatible with 5.2K - 7K trailer axles. They fit with 12" x 2" brake assemblies and have…

There should be a factory brake controller plug on your 2015 Ford F-150, whether it came with a 4-Way or 7-Way connector at the back of the truck. The plug will be located beneath the dash inside your cab. You may need to remove some shroud around…

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

The recommended lug nut torque for your 7,000lb axle depends on a few factors like wheel size, stud size etc. Check out the attached photo which shows the torque specs for a variety of applications. I see you were looking at the Dexter Nev-R-Adjust…

The difference in tire diameter will be an additional 2-1/2 inches going from the 225/75-15 which measure 28.4 to the 235/80-16 which measure 30.9 inches. As a general rule of thumb the minimum safe distance between front and rear tires on the same…

The Electric Trailer Brake Assembly #AKEBRK-7-SA adjusts itself with the application of the brakes. Basically if the brake shoes have to move too far before they touch the drums a pulley spins the adjustment wheel which then takes and adjusts the…

There are differences in them but we do have what you are looking for and they can in some situations be used together. The Replacement Trailer Hub Bearing you have part #02475 and Replacement Race for 02475 Bearing part #02420 are designed to work…

EZ Lube Dust Caps, like #DC200L-DCRP, have a rubber plug that can be removed to access the zerk fitting. The rubber plug can be removed by gently prying it up with a flathead screwdriver. If your dust cap is in good condition and you want to avoid…

Here's the formula to use to determine if you have enough clearance to make a 90 degree turn with a gooseneck hitch installed: (A + B) - C = Clearance A = Distance from the gooseneck ball to the truck cab B = Offset used C = Width of the nose of…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

That sort of technical detail is not included in the specs for the trailer brake assemblies we sell. But in general using a set of brakes rated for the same weight as the axle capacity will provide adequate stopping power. 5200-lbs is a fairly common…