Dimension Of Square Tubing Needed for Swagman Replacement Wheel Hoops

Question

Question:

I love the style of the Swagman bike rack, but cant afford one. I do have an Allen hitch mounted rack and I think itd be an easy mod to add a cross piece to mount the Swagman wheel hoops on. Before I order the wheel loops from you, could you tell me what size square tubing the wheel loops fit on? Thanks!

asked by: Patrick S

0

Expert Reply:

The square tubing that the Replacement Wheel Hoops for Swagman XTC Series Bike Carriers, part # P318 are designed to fit measure 1-1/4 X 1-1/4 inches.

The wheel hoops include the knobs, bolts, and shims, along with the rubber straps for the wheel hoops.

expert reply by: Jeffrey L

0

Answer 1

It sounds like you are looking for the Replacement "B" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks #8880797, for your Yakima TwoTimer Bike Rack. This product replaces a wheel tray assembly "B" with grey wheel…

view full answer...

Answer 2

The square tubing that the Replacement Wheel Hoops for Swagman G10 Bike Series Bike Carriers, part #G1025 are designed to fit measure 1-1/4 X 1-1/4 inches.

view full answer...

Answer 3

I reached out to my contact at Thule, and he walked me through the steps to reconnect the mechanism on your Thule T2 Pro XTR #TH83JV. To get the mechanism re-aligned to move the rack to various positions, remove the side screws on the handle then…

view full answer...

Answer 4

Yes, I spoke with my contact at Curt and he informed me that the beams that the wheel cradles of their bike rack part 18084 install onto are 1-1/4 inch by 1-1/4 inch which is exactly what the #HRSPRWHR that you referenced will fit so the two will…

view full answer...

Answer 5

For your Reese Q-Slot PS63138, the replacement wheel hoop is not an option from Reese. I reached out to my tech contact and they don't offer it as a replacement part. I was able to get the dimensions of the bar and the Replacement Wheel Holder…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Dimension Of Square Tubing Needed for Swagman Replacement Wheel Hoops

Product Page this Question was Asked From

Continue Researching