Replacement Wheel Loop Compatible with Reese Q-Slot Platform Rack

Question

Question:

I have one of these bike racks and have lost one of the wheel loops the right hand one. Can I purchase a wheel loop only?

asked by: Nathan S

0

Expert Reply:

For your Reese Q-Slot PS63138, the replacement wheel hoop is not an option from Reese. I reached out to my tech contact and they don't offer it as a replacement part. I was able to get the dimensions of the bar and the Replacement Wheel Holder for Hollywood Racks Sport Rider Bike Racks - Right Side # HRSPRWHR will be compatible. Since it doesn't have the reflector, I recommend placing it closer to the vehicle versus facing the outside.

expert reply by: Jason S

0

Answer 1

Yes, I spoke with my contact at Curt and he informed me that the beams that the wheel cradles of their bike rack part 18084 install onto are 1-1/4 inch by 1-1/4 inch which is exactly what the #HRSPRWHR that you referenced will fit so the two will…

view full answer...

Answer 2

The square tubing that the Replacement Wheel Hoops for Swagman XTC Series Bike Carriers, part #P318 are designed to fit measure 1-1/4 X 1-1/4 inches. The wheel hoops include the knobs, bolts, and shims, along with the rubber straps for the wheel…

view full answer...

Answer 3

While I have a great hitch option for you, there is not an aftermarket hitch available that will install behind the bumper panel like the factory hitch. But the Curt Trailer Hitch Receiver #C13421 is still going to be a great option for you that…

view full answer...

Answer 4

We haven't yet had the chance to install either the Draw-Tite #76290 or the Curt #C13421 on a 2019 Honda Passport, so those measurements aren't available to me, unfortunately. That being said, based on the photos I attached comparing…

view full answer...

Answer 5

Installing the Draw-Tite #76290 hitch on your 2022 Honda Passport will require absolutely no drilling or trimming to get it to fit. This hitch is rated 3 out of 10 on our install difficulty scale and really shouldn't take much more than 30…

view full answer...

Answer 6

The Curt T-Connector Vehicle Wiring Harness part #C56291 is a fit for both Honda Pilots and Honda Passports. The installation process of this harness on either vehicle will be almost the same save for a few of the rear trim panels being different…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Replacement Wheel Loop Compatible with Reese Q-Slot Platform Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching