Will the Hollywood Racks Replacement Wheel Hoop HRSPRWHR Fit Curt Bike Platform Rack

Question

Question:

Will this item fit . The Curt 18084 Bike Rack?

asked by: Ryan

0

Expert Reply:

Yes, I spoke with my contact at Curt and he informed me that the beams that the wheel cradles of their bike rack part 18084 install onto are 1-1/4 inch by 1-1/4 inch which is exactly what the # HRSPRWHR that you referenced will fit so the two will work great together.

expert reply by: Jameson C

0

Answer 1

Because one of the hooks is longer, it is indeed possible to safely secure two bikes with the same frame height. The answer to your question will depend on the exact geometry of the step-through frames. The wheelbase of the rack is adjustable so that…

view full answer...

Answer 2

One of the great things about the Curt platform bike rack part #C18085 is that it can easily attach to women's bikes like yours and not need an adapter bar. I attached a picture that shows this rack holding a cruiser style bike with a very low…

view full answer...

Answer 3

For the item you have selected, there would not be a problem with having bikes with the same height frame. The hooks that grab the frames are offset by 3 to 3-1/2 inches so that each hook can be securely positioned on both frames. If I can be of…

view full answer...

Answer 4

The Draw-Tite Trailer Hitch Receiver #75876 has a measurement of 4-3/4 inches from the center of the hitch pin hole to the outer edge of the bumper. The Curt Cargo Carrier #C18151 has a distance of 19 inches from the center of the hitch pin hole to…

view full answer...

Answer 5

The square tubing that the Replacement Wheel Hoops for Swagman XTC Series Bike Carriers, part #P318 are designed to fit measure 1-1/4 X 1-1/4 inches. The wheel hoops include the knobs, bolts, and shims, along with the rubber straps for the wheel…

view full answer...

Answer 6

For your Reese Q-Slot PS63138, the replacement wheel hoop is not an option from Reese. I reached out to my tech contact and they don't offer it as a replacement part. I was able to get the dimensions of the bar and the Replacement Wheel Holder…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will the Hollywood Racks Replacement Wheel Hoop HRSPRWHR Fit Curt Bike Platform Rack

Product Page this Question was Asked From

Continue Researching