Fit of Draw-Tite Class II Hitch # 36416 on 2009 Lexus ES350

Question

Question:

Will the Draw-Tite #36416 fit a 2009 Lexus ES 350?

asked by: Kilian B

0

Expert Reply:

Curt offers a Class II hitch, part # C12343 that is a confirmed fit for your 2009 Lexus ES350. Curt tells me that this hitch will also fit a 2009 Camry. If you click the link I've provided, you can see an install video.

At one time, Draw-Tite considered the hitch a fit for the Lexus ES 350. However, they no longer consider the hitch a fit and do not recommend attempting to install it on that vehicle.

expert reply by: Mike L

0

Answer 1

You have to use all of the install hardware of the Curt hitch part #C12343 that you referenced. Sometimes it can be a bit difficult getting all of the holes to line up perfectly. What you will need to do is loosely install all of the hardware so…

view full answer...

Answer 2

We have exactly what you need! Replacement Hardware Kit for Trailer Hitches, #RHK, includes all of the mounting hardware needed. Just go to the #RHK product page, enter the hitch number (C12343) and manufacturer (Curt) and you'll be set.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...