Replacement Awning Roller and Fabric For Damaged 20' Power Awning When Adding Family Room Addition

Question

Question:

I’m not completely clear about whether this family room has its own “ceiling/roof” or if my awning serves that purpose. I’m asking because our awning was damaged when we left for about two hours, forgot to close the awning and a sudden wind storm hit. The roll bar was completely destroyed as it was folded in half. The material has a tear about 6” long that can be repaired with some black duct tape. I understand I need to replace the roll bar but am wondering if I should continue to hold onto the fabric or replace it with this family room. I have the Forest River 2021 Riverstone Legacy model 39RKFB. It was the 20’ awning I’m referring to.

asked by: Debi T

0

Expert Reply:

The awning does act as the roof for the Solera Family Room # LC362235. If you plan on repairing your fabric please use the Repair Tape # CAM42623 rather than duct tape. This tape is specifically designed for use on the awning material and will not dry out like duct tape from the UV rays. We do offer the following Replacement Roller and Fabric Kits for a 20' power awning if you just want to replace them both at once.

Black Fade # LCV000211517
White Fade # LCV000211523
Sand Fade # LCV000231520
Solid Black # LCV000211518
Sand Fade w/ Black Weatherstrip # LCV000231498

We also have just the Roller # LC33FR if you feel like you can live with the rip in the fabric and be okay with seeing the patch.

expert reply by: Bud M

0

Answer 1

You can use the Replacement 20' Wide Roller w/ Fabric for Solera RV Awnings - 8' Projection - Solid Black #LCV000211518. This replaces out dated or damaged awning fabric and roller arms.

view full answer...

Answer 2

We have the Solera Family Room for 20' Wide RV Awnings #LC362235 which will work with the below awnings: - Solera Classic and Hybrid - Solera 12V - Carefree Fiesta, Spirit, and Pioneer - Carefree Traveler and Eclipse 12V - Dometic Sunchaser and…

view full answer...

Answer 3

For a 16' awning we carry the Solera Screen Room for 16' RV Awning #LC362219. This screen room is designed to fit the following awning types: Solera Classic, Hybrid, and Solera 12V power awnings Carefree Fiesta, Spirit, Pioneer manual,…

view full answer...

Answer 4

The Furrion Prep that you have on your 2022 Jayco Jay Flight 264BH has a black wire (ground), brown wire (12 volt positive running light), red wire (12 volt positive camera) and the yellow wire (trigger wire for Furrion Camera). To make your Haloview…

view full answer...

Answer 5

The Solera 20' Sand Fade w/ Black Weather Guard RV Awning (Std) #LCV000231498 will work very nicely with the Solera Family Room #LC362235. I've attached the instructions in photo form to assist with the installation.

view full answer...

Answer 6

The Blaylock EZ Jack and Wheel Chock #EZ-JACK has a lift height of 6 inches. The other axle's wheel is designed to come off the ground, but since it is hanging from the suspension, it will not come off the ground a full 6 inches. I have attached…

view full answer...

Answer 7

I have a couple screens that are close to the dimensions you mentioned. They are the Valterra Bug Screen #A10-1322VP (suburban Models) which is going to be 4.5" x 4.5" and the Valterra Bug Screen #A10-1320VP (Atwood & Suburban) which is…

view full answer...

Answer 8

Since the 2023 Palomino backpack pop up camper 1240 is a smaller camper compared to travel trailers you could get away with a smaller BTU unit like the Advent Air RV AC unit part #ACM135C which comes with everything needed to install as well. It…

view full answer...

Answer 9

The awning does act as the roof for the Solera Family Room #LC362235. If you plan on repairing your fabric please use the Repair Tape #CAM42623 rather than duct tape. This tape is specifically designed for use on the awning material and will not dry…

view full answer...

Answer 10

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 11

To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example. Short styles will measure 61-1/2" and use part…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...